Search results

My wife rides an 06 Sabercat 500 with electric start and reverse. She handles it well and wouldnt switch, I let her try my RTX and she wont ride it again. I think it scared her.....

thought I was loosing my marbles

this may sound dumb but how many straps are there? I only have one in the front on my 06 rtx. I noticed when I was out on the trail it was loose, as in not draw string tight? put it in the shop and when it warms up its tight! it has a mind of its own

I havent received my wheels yet but I will take the skid out. the rear axel bolt has to come completely out so I'm guessing you have to remove the skid. I need to replace hyfax and check bushings etc...anyway

I replaced the two outside on the rear and the four on the front, I left the center ones. Around $300.00. I guess with the fan blades there are supposed to move air and snow around alot better

I hope so

looks good...hopefully my wheels are on the way!

I use Smiths with my HJC helmet, work good until they get wet. I would guess all goggles fog then.

I did 144 down the center ;)!

I dont want to cut it, when I go to the mountains I wont have enough track..just wondering what people have run on theirs. whats the best running 1.25 track?

NO. I went the right way...up! I only have 2400 miles on the sled, track wasnt to tight....myself and some friends tried to pin point the problem but figured it was just a bad bearing, but if that was the case how did I make it to 2400 miles? anyway put in new bearings and set it back to where...

Heres Mine Riding in the UP Michigan

I also did the rear suspension mod, (raising it) and it tore out my drive bearing. I have a 4" riser on it and that is nice. I also have the MPI transfer kit instead of the Rods. What is the gear/clutch ratio you are using? Apex seat? what year fits? The seat could be better.

I did this Mod and it tore out my drive axle bearings :o|

I have a pretty much stock 03 RX MTN with the 151 - 2 in paddle and was wondering if any flat landers out there run 1.25 tracks on these. Any switching in gearing to make these into trail sleds? I like the sled but dont really need a Mountain so I'm trying to decide if it should go or try to...

found it in the sticky :o|

Hello All, I remember reading somewhere in here that someone drilled new holes in the stock drop brackets. I recently had my suspension out and thought what the heck, so I drilled them out! I havent had the chance to try it out yet but from the thread its supposed to handle like a sports car on...

Hello everyone, I was tinkering with ny 03 RX mtn and found alot of crank case oil in my air filter. After talking with my buddy he said when you fill it you just dip the stick instead of turning it all the way in to check level. is this correct? hopefully I just over filled it :o|

What is the rider forward?

I live in Brainerd, I Already put on powder pros. How about the front? I read somewhere that widening it is almost a must