Search results

Woodys offers both a 1.450" and 1.575" gold digger.

Storm 150 tracks in stock. Take a look. CBPerformanceparts.com

9368H......$458.00 15 x 120 x 1.5 9369H......$487.00 15 x 129 x 1.5 9370H......$505.00 15 x 137 x 1.5 9371H.......$528.00 15 x 146 x 1.5 ALL TRACK PLUS SHIPPING BUY ON LINE CBPERFORMANCEPARTS.COM

Visit us at http://www.cbperformanceparts.com/ to get 10% off your entire order for your Studs, Backers, and Carbide needs. No coupon code required but this will only be available for a limited time.

What do you have your GEMS settings at?

Just to be clear, the sidewinders come with 2-ply tracks, not single ply.

The louvers are exactly 3.5" wide so in order to truly avoid them, you can only go up to #5. This gives you ~1/4" of slop which should account for track movement left/right while riding.

The vent louvers are 3.5 inches wide

With a properly installed 1.325" woody's stud on a 1.25" lug track, you will get ~.375" over the lug. A properly installed 1.450" woody's stud on a 1.25" lug track will put you at ~.500" over the lug. I have used calipers for this measurement because I have OCD, haha. Below is a woody's chart...

This pattern shows 168 studs on the inside belt and 48 on the outside for 216. The template itself is universal and countless stud patterns can be created from it. Each row represents a lug spacing on your track (48 in total on a 137") Hopefully this clears it up.

When utilizing the black template shown in the image above, you just follow the design shown below. This design shows a studding pattern with 112 studs on the inside and 48 on the outside. The one shown below will avoid studding within the center 3" of the track.

I can create a quick pattern tomorrow with the inner most 3" being avoided. Thanks

I just quickly came up with this pattern which avoids the center 2" of the track. You can use this in combination with our studding template. It has 144 studs down the center and 48 on the outside for a 137" long track. A similar design can be used/created for a 129" track.

It is currently all across the board. I can develope a pattern with the template to avoid the center 1.25-1.5" if youd like. let me know, thanks

MrKovac, The only 144 down the middle pattern we supply is the one attached. These are very universal templates and if you want to utilize a different pattern, the template will allow you to do that. Hope this helps.

After getting some feedback from this site, we are now providing an optimized Studding Kit for all 129" & 137" Tracks (2.86 Pitch). The kit will include the following (Picture provided for reference): -Studs -Nuts -Backers -Plastic Waterjet Template -Optimized Studding Pattern (Paper...

When running a trail track and studs at st germain last year, this exact setup ran 105 mph in 1000 ft with the track spinning for the first 100 or so feet. With a proper track, i would run closer to 108-109. As far as top speed, it is well into the 116-119 range on radar in hardpack conditions.

We can substitute in the powerpoints and it would be $1.85/stud vs woodys gold diggers at $1.71/stud.

Gold diggers and mega bites are made of the EXACT same hardened steel material. There are 4 differences between the studs. The first is the 1" diameter head of the gold digger vs the 15/16" diameter head of the megabite. Second is the cup of the gold digger head vs the flat head of the megabite...

We have the pattern for all of the 8 I listed above including the 192