Search results

When mounting onto the cover make sure you tape it on and test it with the body back on.....i ALMOST screwed that one up!

make sure the connectors for power and ground are good again and didnt break, ive had these break away from the wires at the mounts and they look good but dont work. other than that i would say they bad ballasts or relay, they will probably send you a whole new kit.

swap bulb or ballast (box) from side to side which ever is easiest in your case to see if its the bulb or the ballast. i would guess ballast is bad. nice thing is they are warrantied, bad thing is they ship out of china so you will have to wait on it.

Has anyone had an issue with an ultra q? I wasnt going to tune the sled but mine seems to miss/pop once everytime I tap the throttle, possible throttle override issue?

I just ordered my OFT kit....like 5 minutes ago, does anyone have pictures of how much they cut, im thinking you are cutting the dash or was your concern the cutting of the cable retainer?. Im not going to cut mine yet but i would like to see it. also any tips on aligning the bars and skis after...

Does anyone have pictures of the bags on the sled, I just bought a mid shield and want a bag for my phone and maybe a tuque so I don't have to keep taking off the hood. I was on the Yamaha site and they have the short rectangle one as well as a triangle one. I want to see how any of them look on...

Mine came with the tall painted white and black, hated the look but left it to test warmth....didn't make much of a difference to me so I took it off and plasti dipped my chrome shorty black.

How does the Moflow kit stay on, is it bolted or just adhesive?

i wouldn't advise to run straight piped, too loud and you would loose the velocity in the exhaust, unless you are going to tune your pipe length and diameter you will loose power, when i had my pipe off i started the sled and it responded fine. When someone was talking about scavenging you...

GC_SRT, how is the engine set up to run with backpressure, on a NA engine back pressure is one of the worst things to have....is it not?

I ran one in the stock hole on the dash, direct to battery with a fuse on the positive side, made the fuse visible when hood is off so come summer i can pull the fuse and not worry. I work at VW/Audi so i found an Audi plug that had a plastic nut for the backside and it fits perfect.

I just built one for my 121, just a piece of 2' x 1' Diamond plate and put it on top the protectors. I had to drill 2 rivets on each of the protectors so I could slide it in from the back and dent the front a little so it would clear the exhaust. I put about 4 rivets on each side to hold the...

Dad came inside asking why I had no fuel....tore it down and on the right side behind the reverse lever there is a green plug with two wires. This is the level sensor plug as the other end goes into the side of the tank one of the prongs had some corrosion. Electrical cleaner and dielectric...

Thanks, just turned the key and it flashed for about a minute then started to read 3/4 of a tank.... cant get it to flash again. Ill definetly keep an eye on it but hopefully the sensor was "confused"

I'm guessing this is on the pump, under the seat? I thought about that but I only remember one plug and it runs fine so I marked the plug off as okay, I'll have to check when I get back home.

I have been doing some work to my sled the last few weeks since i bought it and just now have an issue. I bought the sled about 6 weeks ago and it was reading one bar of fuel. Some of the things i have done that may deal with it are, New battery, new plugs (i disconnected coils not injectors)...

Thanks guys, Does anyone have pics of the bags on the sleds, and how are they mounting, just Velcro straps?? and I definitely cant be melting my cheese snacks mid ride!!

Hey everyone, Both myself and one of my friends have 08 Nytro Short tracks and we have been looking for trail bags that don't block the foot wells, i have seen the saddle bags but we like to stand on the back of the rails so these would be in the way. For now I can deal with the accessory...

Hey one question and a clarification, the HID kit is not the "Motorcycle kit", its the basic H$ HI/LOW kit? and is that handle bar bag decent on stock bars, i'm looking to add a power outlet to my sled and want a bag to hold my phone.