Search results

spring Thanks for the info Guy's the spring in mine is Black & I can't find any other color's on it & I have it set at 3-3. Not sure if this would make my RPM'S flat line at 9000

anybody now what the stock secondary spring color is on a 05 rx-1 er-le & what the setting should be? Thanks

max rpm Thanks for the info I will check everything & let you know what I find

rx-1 max rpm thanks turk. I'm very new to clutching. with that said if I run less weight will it rev higher? can I take one or both of the rivets out of the weights?

I have a 05 rx-1 er-le & I had to put a new used primary clutch on it the clutch is from a 08 nytro I put the rx-1 weights in it & it only revs 9000 rpm is this correct or should it rev higher? I would also like to know if I can run the nytro weights? Any help would be great. Also I forgot to...

I have a 05 rx-1 er-le & I had to put a new used primary clutch on it the clutch is from a 08 nytro I put the rx-1 weights in it & it only revs 9000 rpm is this correct or should it rev higher? I would also like to know if I can run the nytro weights? Any help would be great

popping Did you rejet for this mod? I would say you may have to do this

y.e.s That is what yamaha told me. Thanks for the help

allen head I had same problem I welded a socket to them & I plan on using Stainless steel when I replace them. those bolts are totally crap as with most parts on these danged yamaha's

y.e.s Can I buy a extended warranty on a used sled? I have a 05 with 3300 miles yamaha told me couldn't is this true?

rear skid sorry I didn't explain in full I only lowered the very rear brackets not the whole skid the back not the front of the skid. I only did this for some extra lift in the rear of the sled I know this doesn't give me anymore travel. I have seen companies that make & sell these lowering...

this maybe a silly question but I'm fairly new to sled mods what I did is drop my rear skid mounting brackets 1" lower Now it seems my track ajustment are about maxed out. Do I need to do something else to make this work right or just put it back to stock location? any help would be great...

oil x2 on the amsoil best stuff there is but more money. like the saying goes you get what you pay for. I would get there filter aswell just for piece of mind ;)!

I would like to see a dyno of this cause its hard to believe that just by jumping compression & advancing cam timing you would get 22hp. (this is not head porting) the head in its stock form will only flow so much Don't get me wrong there are good numbers to be made in porting the head with the...

fuel when I took my carbs off for cleaning I had to hand choke a couple of the carbs to get fuel back to them I would have a friend help you & hand choke carbs 1&4 these are the carbs that hook to the pumps just put hands over those carbs till she fires if this doen't work then there is...

battery well to start with give it a jump start then take a multimeter & measure the voltage off the battery with it running to see if its charging. this should be your starting point of your trouble shooting. I think it shoud be putting out 14+ volts running you can test from the jump start...

rails Well what I'm doing is about the same as the ones in this pic but I'm not going all the way to the front bolt like in pic I'm going to the middle bolt to start with I'm taking a piece of cearal box to trace it out like one in pic then taken 1/4'' alum sheet & cutting out the pieces I...

rails Yes you can get them from any yamaha parts supply they are on 06 & newer apex models but they will cost about 250 us. I'm in the works of building my own for my 05 rx-1 but I will only have about 10 to 20 bucks in it. If you know of any fab shops around you take the rails to them & they...

bushings well at 3900 miles I would say change them but if there is no slop between the collar's and the bushings then they are still good. mine were gone at 3000 miles & most of the collar's had wear on them these plastic bushings are one of the worst idea's I have ever see really poor design...

bushings yes I did mountain performance has the kits. Here is a link just scroll down the page & you will see them. Hope this helps http://www.mountainperformance.com/yama ... ension.htm