Search results

When you change oil drain the oil through a coffee filter and cut filter apart and see if you find any metal.

Best color ever!

Good story. The wrap and a can will always make a sled faster!

I put the 4th wheel kit from Barn of Parts on my 2011 XTX today. The new wheel seems slightly larger so when I set track tension I had to back out the right side 2 extra turns to get the track tension correct. The new wheel is about 1/8 bigger than the other 3 original wheel. My sled has 4000...

The other guy offered more would be my guess!

I know a copper ones will not wear out, but do the graphite ones provide a better cushion and not be as harsh on the titanium pipes?

Tim@DBF from RA

Are you Brad Aka Torchsport?

I feel a lower trailer would pull a lot easier myself. I think you can get them but most times you need to custom order. Not sure why they seem to make a lot of 7 foot high trailers. Seems like the lower ones would be a lot better for aerodynamics.

Do you have a fourth wheel kit and a 13 mm sway bar for a 2011 Yamaha Apex XTX? If so how much?

Has anyone had a battery that had cracked case after only in the sled one month. I bought a brand new Yuasa 20 series battery from Port Yamaha and my sled would not start on the cold mornings. It cranked really slow and had to jump the sled in the morning. It started all day long once warm. I...

Here is my 2011 Apex XTX

Does the cluster light up? My cluster would not even light up and no clicking of relays or cranking. When I wiggled on the white 4 pin ignition switch connector it worked normally. Squeezed the female connectors a bit and filled the connector with di-electric grease now all good!

A 4 cylinder APEX motor!

Lol. I was getting and intermittent no crank and no instrument cluster lighting up when cycling key on. I found loose pin figment in the white 4 pin ignition switch connector. It is located 4 to 6 inches from ignition switch. I pull out all the pins and squeezed them together a bit and then...

Where is the relays located.

You did it right then! If you every have a hard to find coolant leak the fittings for the turbo coolant cooling tubes leak at the turbos and at the block. When you do those you will also what to replace the turbo oil feed lines screens.

Did you replace the CVT Phaser sprockets? How many miles on ur truck?

I did end up getting a new seat foam and cover from WRP/Seat Concepts. My question is if you know was I supposed to also get the vapor barrier? All that came in the box was foam and a cover. Your video shows a vapor barrier between the foam and the vinyl cover. Their website says they are...