Search results

tried the 13mm and cornered flat but rode to stiff, I had the air shocks, didn't matter where i set them still to stiff!!!!!!!!! went back to stock maybe a 12 would work??????????? and tried pioneer revalve, ended up with high gear shock,simons gen II skis, best investment you will make for...

have a pair of the new style simons skis with extra set of cabides, they are black with red splashed in, like new $300 shiipped in the states ckm sold my apex

tried shims, carbides form everyone and pilot ski's, they helped but not like simons skis, one hand rideing and NO darting or pushing!!!!!!!!!!! this was THE BEST ski for my apex period. ckm

getting a 08 450 rino and need to to know any faults withit, don't need big speed so other than that whats dif between 450 and 660. going to use for yard and trail work. thanks mace

transfer rod just take it out and try it, mine broke and had to ride for 500 miles and what a blass, and could take off hard without a wheely by leaning over bars, or pull a 2 foot wheely at 50mph ckm

shock had pioneer do my shock on 06 rtx and helped a lot but road to stiff for me, he put on bigger spring and revavle, good but not great, called hygear, they had done my 05 machz, and had them do revavle, external res with hi and low speed compression clickers and their dual spring, road...

clutch kit have a proline (dalton) set with springs, helix, and wieghts (arms) $150 email me at ckmacey79@aol.com thanks ckm

clutch set up have a dalton, proline set for sale $150 shipped, comes with spring , helix, and arms. ckm email me at ckmacey79@aol.com

exhaust noise same prob here, tried ear plugs and worked good if I remembered them, changed track twice, same noise, tried diff flyweights (clutch arms) so sled would rev about 5500rpm at 20 mph and had same noise as stock weights at 5500 rpm at 35-40 mph. think its the harmonics threw exhaust...

will these wieghts work in an apex, by that I mean fit or is the pin a dif size? thanks ckm

06 apex with 3000 miles, last year would rev to 10500 and stay there with stock clutching now with proline or ulmers setupwill only rev to 10200. heres what I have tried, took tip wieght out of ulmers,now 10300, changed primary from o-p-o to 0-s-o and only gained 100 rpm? now put on advantage...

doo or yamaha don't want to start a war but if it were me would get a 600 sdi renegade, lighter better milage, better off trail flotation. was a skidoo guy for 25 years or more and last year went to apex and will not look back, but I trail with very little of trail. on trail yamaha(bumpy or...

anyone using this secondary if so how do you like it? I have one and its really smooth. would like to clutch for more top end. what are you guys using for clutching? have 06 rtx with 40 bottom gear, tried ulmer fly wieghts and pioneer flywieghts and think with this roller secondary that...

code 20 have manual and looks like intake air pressure sensor is on top of the fuel rail above the pressure regulator, and intake air on brake handle side of air box, do have manual on how to test each circuit. call me if you need more info at 518-643-9439 ask for chris, new york ckm

anyone read the article (can/t remember where) about a shop that sells cam or cams for the apex that will bring HP up to 200 hp just by changing cam or cams for about $1000? if anyone does know about this I would like to know who it is, am interested thanks ckm

am a flat lander and am interested in mountain performance supercharger setup, but would like to know if gas milage is going to go in the toilet? would be trail riding 90% of time with 10% run on lakes. i get about 14 1/2 to 15 1/2 now thanks ckm

would like to lean out sled a little and want to know what wire to ground out? what buttons to push? thanks ckm

air shocks have them on both my rtx and nytro and would not go back to reg shocks, have shock boots on the rtx and no boots on nytro and see no diff. am going to put covers on nytro for looks tried to air done to ride softer (40 psi) and did ride softer untill I would hit bigger bumps then...

looking for phone # to contact whoever sells the roller rooster from advantedge thanks ckm

anyone tied a roller secondary on their apex? if so what kind and how much? did it work good for you? thanks ckm