Search results

Well looks like the gauge just needed to blow the cob webs out! Took the sled out for a rip today and they it's working great! Lol not sure what it's issue was but I hope it stays working!

Hey guys I've got an 09 nytro XTX with an mpi stage 2 super on it. I fired it up for the first time this year and my boost gauge is reading 25 psi at idle? The sled sounds good and runs fine but the gauge is throwing me off a bit. Are these gauges prone to failure like this or do I have a...

So I did some searching and didn't see anything in regards to utilizing the stock muffler and doing an under tunnel ? It's probably because it's not possible but I figured I'd ask here and see if anyone has attempted it. It looks like if you cut a few inches off the header it would move the...

No one's tried this at all? Well that's to bad, looks like I might have to be the first!

Hey guys I'm looking to get some fox floats for my 09 nytro XTX and was wondering if the slightly shorter shocks off an apex/vector would work with my sled? I realize I would lose an inch of travel but would the shocks not work at all? Thanks

So I checked the part numbers on a phazer, apex and nytro primary clutch. Looks like the spider is the same for all 3 but the end plate and outer sheave are different for all 3. I had been told the apex and nytro clutch were interchangeable but the numbers show different parts? Anyone know...

Hey guys so my nytro primary clutch had a weight and roller let go the other night. Weight flew into the secondary as well and cracked a sheave. Found a used secondary and now I'm looking for a primary. Found a decent deal on a phazer primary and wanted to know if it will work? If not will an...

I havent decided if im going to put the turn out up or to the side yet. I prefer the way it looks going upwards but I am a little worried about it catching moisture. Any idea if it would hurt anything having it pointed up? Ya they dont have a yamaha kit for a couple reasons I think its...

Any updates on this yet Mr. Sled? Looking forward to hearing how its working for you

Hey guys I just put my 2 gallon rotopax on today and I think it turned out pretty good! I havent had a chance to try it out yet but I will let you know once my sled is back up and running (oil tank cracked open).

Wow!!! Yours is way worse! That would be awful even without the 100 mile ride back to the truck. Hope you can get it back up and running for a lot less then that. Ill be running my wifes phazer for a bit until mine is back together. Ouch. ..

Just thought I'd vent a little guys. We just received over a foot of snow and I fired up my nytro to move it around in the yard, shut it down and hear some fluid pouring out............oil gushing out the bottom of my sled. :die Take my panels off and found the top 2 tabs on my oil tank...

My buddy just went through a similar problem with his 2006 nytro. He bought it from a dealer that told him it was good to go and just had the carbs cleaned. First ride it fell on its face and would only run on two cylinders. Had the carbs cleaned again no change. Took them apart a few more...

Love the look of this front end!!!! Cant wait to hear the ride reports on this! If they are really positive ill be getting this setup.

Well I guess ill find out. Hope it works ok for me. Do you have any pics of the mount with the tank off?

Ok so we dug into this a little more and turns out its not a fuel issue. We checked a bunch of stuff and even replaced the fuel tank filter. It still sputtered and wasnt running right. We thought maybe a bad plug cap so checked them all and thought we found a bad one but when we cross checked...

Hey guys my buddies sled wasnt running right the other day. It would run good then go to 2 cylinders then flip back and forth. He put new plugs in with no change. Took carbs off and had a yamaha mechanic take apart, clean and readjust(the one cylinder was out a bit). Got it back together...

Just ordered my 2 gallon can and mount from rotopax so once I get it installed I will post up a few pics for everyone to take a look. :Rockon:

That setup looks awesome! The doo can is what gave me the idea for the rotopax. Want to go with the roto because I can get it in blue.