03 RX1 with 06 Apex monoshock Skid DOABLE?

[kinsound]

03 RX1 with 06 Apex monoshock Skid


Anyone know if this is an easy bolt on update or is there a lot of new holes and moving?

Has anyone done this and if so how is it?

 

[LazyBastard]

Every hole is different.

 

[kinsound]

My M10 used the 2 front and I had to move the rear....has anyone done this yet?

 

[kinsound]

Has anyone tried this yet... It seems like a great upgrade for the 03

 

[race24x]

I put a Skidoo SC10III in my RX and guys have put AC and Poo skids in I am sure it is dooable

 

[DoktorC]

Find an 05 and measure where the holes are....It should be fairly easy considering there are only two holes per side (not 3 like the PA).

 

[kinsound]

Thanks... I ordered an 06 apex mono with Ec Ohlins for the same price as an M-10. And hopefully this will not break apart like the M-10

 

[race24x]

Damn man what did you hit to do that

 

[kinsound]

nothing outrages.. Just some rough trails and a bridge lips. 700 miles with the logs stuck in is not something I would encourage for all to try. But I have some good stories

 

[boat.man]

Ya! I put a 06 mono in a 03. Easy!! best money i have spent on the sled!
Here is a link to the install. pm me if you have any questions!

Good luck

http://www.ty4stroke.com/viewtopic.php?t=33033

 

[kinsound]

boat.man...

Thanks for the info...
I am assuming that the first 2 part #'s are Left and Right.

8FU-21943-00-00
.BRACKET, MAIN TRACK 1 for left or right side?

8FU-21953-00-00
.BRACKET, MAIN TRACK 2 for left or right side?[/

(2) you need 2 of the out side ones
8FU-21919-00-00
.BRACKET, MAIN TRACK 3 This seems not side specific??

 

[boat.man]

boat.man...

Thanks for the info...
I am assuming that the first 2 part #'s are Left and Right.

8FU-21943-00-00
.BRACKET, MAIN TRACK 1 for left or right side?

FY-21953-00-00
.BRACKET, MAIN TRACK 2 for left or right side?[/

(2) you need 2 of the out side ones


8FU-21919-00-00
.BRACKET, MAIN TRACK 3 This seems not side specific??

Yes the inner brackets are specific to the left and right I don't remember witch one is left or right but when you get them they only fit ONE way in the tunnel, the outers are just small support brackets.

 

[kinsound]

boat.man...

Did you get a skid with an EC ohlin/
If so what and where did you get a controller?

 

[boat.man]

No I have an RTX skid with the R.A.
P.S. I had to replace all the idlers and it needs the heavier spring + shock valving. But I still think it is the best thing i could have put in it!

 

[LazyBastard]

If you break an M10 like that, I don't think that the mono is going to do you any better. Do yourself a favor and get an ExpertX. They're 100x stronger than any other skid out there.