ramblnman
Veteran
so i just got the exhaust taken care of and now the shock would not adjust so i thought a wire was broke so i cut the zip ties and unhooked the wire connector by the shock, wires looked good so i popped off the cap to the shock and it looks like there should be 2 copper wires but there is only 1 sticking out of the underside of that cap that looks to be molded in to the cap. does this mean i need a new selenoid cap?and if so where is the cheapest? part#?
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Reaction score
- 5
- Points
- 1,218
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
You can buy a new solenoid. I'd PM bjowett from the site. He sells them.
I quote bjowett from this post:
"I have one in stock. Current Ohlins retail is $62.44.
The Yamaha number I have is 03FA016F0
Ohlins number 20014-05"
http://www.ty4stroke.com/viewtopic.php? ... t=solenoid
Here's some reading for you:
http://www.ty4stroke.com/viewtopic.php?t=55179
I quote bjowett from this post:
"I have one in stock. Current Ohlins retail is $62.44.
The Yamaha number I have is 03FA016F0
Ohlins number 20014-05"
http://www.ty4stroke.com/viewtopic.php? ... t=solenoid
Here's some reading for you:
http://www.ty4stroke.com/viewtopic.php?t=55179
ramblnman
Veteran
that was fast! thanks super sled! this info should be in frequently asked apex questions.. sticky
