08 apex gt ltx studding?

[FlyingFej]

I have an 08 apex gt ltx, and I need to stud it. I am wondering from experts the best number of studs and length for this sled. Set up for semi-aggressive trail riding. I want to stud it down the center band only and also if it needs any protectors. Thanks in advance.

 

[Phazernut]

Not sure on the number for the LTX but I use 192 Woodys 1.450 in mine and it hooks like a bear.

 

[Mighty]

I would start out with 108 down the middle and go from there. I also went with 1.325 woody's. Manufactures aren't uniform on how they measure their stud length so it can get confusing when talking lengths........

 

[SharkAttak]

1.325 studs don't hook good, if you got the ripsaw go with the 1.450 studs

 

[70superbee]

I ran 136 down the middle for 5000 plus miles and it worked pretty good. Then I put on a cobra and 162 down the middle and it is awesome out of the hole and pulls graet down low. When it had the ripsaw I would get some racheting out of the hole have to run the track tight to keep it from happening. I also put in 1.450 mega bite studs, should have stayed with 1.350. They hit the pipe protector a little bit.
Hope this helps.
Rich

 

[SharkAttak]

I ran 136 down the middle for 5000 plus miles and it worked pretty good. Then I put on a cobra and 162 down the middle and it is awesome out of the hole and pulls graet down low. When it had the ripsaw I would get some racheting out of the hole have to run the track tight to keep it from happening. I also put in 1.450 mega bite studs, should have stayed with 1.350. They hit the pipe protector a little bit.
Hope this helps.
Rich

did you add to your tunnel protectors?

 

[70superbee]

No I did not add anything to the tunnel protecters.If you add anything to the protecters with the cobra it will rub alot and slow you down.