10 tooth drivers

[ScottyD]

i'm thinking of changing to 10 tooth drivers when i change my track, i figure the less rolling resistance might give me a few mph on the topend, anyone have an opinion

 

[kinger]

I have them, cant notice any difference and it limits you to a 1" track. The speedo is radar acurate now though.

 

[grader]

have been running them since 04, first on my 03rx and now on my 05 rx. i removed the tunnel protectors and am running the ice ripper 1 1/4 with no problems. as kinger said the speedo is right on, but the odometer reads a little low. i also have a 136 expert x with 8 inch rear wheels to match the drivers. the larger drivers also improve the track approach angle slightly. i run 22-42 gears with overdrive clutches.