136" Phazer?

[Bakemono]

What do you all think about the possibility of a 136" Phazer in the future?
IMO, should have a 136" Phazer just like they have a 136" offering with the 150FI and 120 engines.
I think they should make a 136" Phazer with 1" lugs. The Mountain Lite has possibilities as a "rough trail" sled, but the tall lugs pretty much limit it to being a powder sled, IMO.
I personally think Yamaha will offer a 136" Phazer in the future.
Whats your opinion?

 

[pro116]

hartman

contact hartman there tunnel extension's look 10 times better thanyamaha's any way.They actually come out even with the tunnel versus 2 " lower than the tunnel.

 

[LazyBastard]

Your 136 might be a problem... only track available is camoplast 9783, which is 13" wide and .725 lug. The rest of the 136" tracks are 15 and 16" wide.

If you step up to 144" though, you have the camoplast 9044, which is 14x144x1.5"

 

[redsnake3]

the 144 has about the same square inchs as the 136 anyways.

 

[Turtle]

The Artic Cat Firecats all had 14" wide tracks. Did they make one with a 136" length? I know they did a 121" (the Firecat) and a 144" (the Sabercat EXT), but I'm not sure about a 136" If they did, maybe you could get a take-off track.

 

[Grimm]

The Artic Cat Firecats all had 14" wide tracks. Did they make one with a 136" length? I know they did a 121" (the Firecat) and a 144" (the Sabercat EXT), but I'm not sure about a 136" If they did, maybe you could get a take-off track.

I thought the lengths of those AC tracks were 128".

I would love to see a Phazer with a 136" track...and a 120hp+ motor in it for next year. That would be sweet.

 

[4Fighter]

While we're speculating:

I too would ike to see an FX with a motor made out of two 450F cylinders...and a 136" track. 120 - 130 HP.

 

[pro116]

sled

While we're speculating:

I too would ike to see an FX with a motor made out of two 450F cylinders...and a 136" track. 120 - 130 HP.

That would be the ultimate trail sled for me.

 

[jimmie d]

Camoplast makea a 136"x14"x1.5" SnoCross/HillCross track, it is on my VX7R.

Jim

 

[Turtle]

The Artic Cat Firecats all had 14" wide tracks. Did they make one with a 136" length? I know they did a 121" (the Firecat) and a 144" (the Sabercat EXT), but I'm not sure about a 136" If they did, maybe you could get a take-off track.

I thought the lengths of those AC tracks were 128".

I would love to see a Phazer with a 136" track...and a 120hp+ motor in it for next year. That would be sweet.

You're right - it was 128" .... my bad

 

[Red2003]

While we're speculating:

I too would ike to see an FX with a motor made out of two 450F cylinders...and a 136" track. 120 - 130 HP.

As ugly as I thought the Phazers were when I first saw them, and still kinda do, I WOULD buy this sled too!!! That would absolutely rip on ANY trail.

 

[Grimm]

Note to Yamaha:

I guarantee I will buy a Phazer with a 120hp and 136" track.

 

[4Fighter]

Note to Yamaha:

I guarantee I will buy a Phazer with a 120hp and 136" track.

Note to Yamaha:

I can't guarantee that I will buy a Phazer in that configuration, but I can guarantee that I will at least start an argument with my wife over one.

It's all your fault. Thanks for making the RX-1 so damned reliable.

 

[Yellowknife]

I want to see the Attak with a 144" and drop some more weight and I'll buy one when the warranty is out on my Rev. Some mags reference it as a cross-over sled, but the 136 isn't enough length for the weight of the front end in serious powder, and of coarse the ripsaw sucks in deep snow.

 

[sledneck06]

can you fit a 15" track on a phazer?