151 stretch without extensions or brackets (pics)

[jlparker77]

I used a 151x2x15 challenger that was ported that i cut down to 14.25. I moved the skid back 3 inches and it put me right in the middle of the adjustment slot.

The rear would look better, but i had a little trial and error and had to weld up some holes and move them a little.

The only thing stopping me from this being the easiest thing ever is the bumper bolts. I knocked the welded nuts off the inside of the tunnel and ground the original bolts down and put them in backwards with new nuts, but when i get closer to town i will just buy some 5/16 elevator bolts and put them on.

 

[jlparker77]

here is one of the better angle of attack

The other sled is an 05 vector mountain, and this nearly matched that angle. Maybe a bit shallower.