2 bolt mounts for idler wheels.

[Kevlar55]

I picked up some 2 bolt idler wheel mounts for my 07 Attak with Kimpex wheels.
Does anyone have pictures of how to mount them. The mounts don't fit or I'm doing something wrong. I did look for threads on this but the pictures are not there anymore. Also what bolts should I use for the second bolt.

Thanks, Kevin.

 

[sgauthier]

??? need more info for anyone to help you out

 

[DoktorC]

I used old Pro-Action wheel mount because I knew they fit over the rail extrusion. Line up the stock bolt hole and lock it down with a bolt then drill the second hole. I know one of the holes is over a cut out in the rail so I made a washer fit so the bolt head didn't dig into the rail. I happened to have the yamaha hardware with my mounts but regular bolts will do the job.

 

[YammyRX1]

I know the Pioneer wheel kit has some dual hole mounts and they lined up with one existing hole and then you just used the second hole in the mount as a guide to drill the second hole through the rail. Not sure if the Kimpex is a similar design.

 

[Kevlar55]

Thanks I'll be doing some work on it tonight. Getting ready for the last trip to Maine and don't want any headaches.

Thanks, Kevin.

 

[steiner]

Here is the thread about 2 bolt mounts.
http://www.ty4stroke.com/threads/idler-wheels-2-bolt-mounts-mono-skid-fixes-pics.78847/
I had to grind the notch wider on the mount so it would fit onto the rail.
Also on the 2nd wheel mounts I ground the back down so it would sit flat on the rail and the pivot support.
The Pioneer kit is much easier.

 

[viper7mi]

I have a Attak and bought the extra wheel kit for the front and middle section and it works good. The BEST item I got is the drop down kit from Pioneer with stock spoke wheels. This setup eliminates the wear on the hifax and it rolls super easy.

 

[Kevlar55]

I already have the wheels and mounts, so I'll have to make them work.

Thanks, Kevin.