2 inch on attak

[newfieattak]

just picked up 2 inch 136 camoplast challenger and 9 tooth external doo drivers, and changing gear down to a 22 top on 07 attak ,any one else put a 2 inch on , is there enough room with tunnel protectors removed.
looks like lots of room at front of track not sure above clearance will allow with out going to 8 tooth drivers.

 

[Turk]

1.75 is about all you got!

 

[suprfst]

I put 2" track on my rx should be the same as a attak,I used the stock 9 tooth drivers even with tunnel protectors in place.heres the link

http://ty4stroke.com/viewtopic.php?t=27128&highlight=

 

[Dane]

There is no way you could get a 2" on the attack, a 1.5" lug is likely as big as you can go.

 

[newfieattak]

turk,have you put a 1.75 on , i can cut down the track.

 

[Turk]

I have personally seen a 2.25 cut down to about a 1.75 fit on a 07 Attak. Wicked hook!!!!

 

[newfieattak]

just wondering if i put a set of 8 tooth drivers on would it give me clearance for the 2 inch

 

[Turk]

8 tooth drivers will give you enuff clearence but you might have to change gearing cus 8 tooth drivers really lowers your gear ratio a lot.

 

[newfieattak]

this would give me a more mountain like gearing,
stronger out of the hole. ratio should be 1.84 instead of 1.73

 

[ATTAK1]

I just in stalled a 1.5 track on my attak yesterday. I took out the tunnel protectors, there is lots of room.

 

[newfieattak]

just installed 2 inch today , have about 1/4 inch at front and no rubbing any where when ran on stand.

 

[mclarenyamaha]

have anybody tried these noslip weels. sombody says they are no good qualiti compared to whal-bros noslip. have sombody tried these on apex and how did they function. and is the diameter on the driveshaft the same.

 

[newfieattak]

put on doo extroverts very good quality same shaft dia as yamaha ,ran last year on apex rtx no problems