I can tell you this much i was one of the first ones to put the zr skid in my 03 rx1 and we had revalved foc clickers both front and rear torque arms had them and the big boy spring on and i totalled the skid,bent the front torque arm and both TSlinks bad,smashing thru the very deep and squared edge bumps,now this is because this suspension is not made for this sled,and we had to make up mounting plates,but we should of either hardened the plate or installed hard steel inserts for the bolts to go thru,as i elongated them and it smashed into my heat exchanger and ruined a very long week of riding. Now the ride was very very much improved but,a word of caution,it threw off the handling of the sled alot IMO but it did transfer and ride unbelievable compared to the stock yammi. If the bender is that great and you already have it ordered i would wait and see what or when they can deliver.