copboy27
Newbie
- Joined
- Feb 11, 2013
- Messages
- 5
- Reaction score
- 0
- Points
- 11
I W's hoping someone might be able towalk me through replacing the lower inside idler wheel. On the schematic it is part 18. It looks as if it is attached to a crossmember that the shock is also attached to. Any help would be appreciated.
Handy
Expert
- Joined
- May 12, 2005
- Messages
- 374
- Reaction score
- 58
- Points
- 908
- Location
- Anola Manitoba
- Country
- Canada
- Snowmobile
- 1983 Bravo, 1988 XLV, 1991 Pazer II, 2005 Vector, 2006 Apex Super Charged, 2017 Viper STX DX 137, 2018 SR Venture DX
the only way that I was able to change those wheels was to pull the skid out and then loosen all the shafts that hold both rail together. It is an awfully difficult job but if you take your time its doable.
RobWarrior
TY 4 Stroke Junkie
- Joined
- Oct 4, 2008
- Messages
- 546
- Reaction score
- 44
- Points
- 1,028
- Location
- Western Ma
- Country
- USA
- Snowmobile
- 09 FX NYTRO RTX
I just did mine this fall...I didn't have to take the rails apart, you do have to undo the shock mount and the shaft the wheels are on, be careful putting it back together you have to get all the bolts in place before tightening anything because you can't get the bolts in after. Not as hard as it sounds.
