I hope this thread helps others after 3 frustrating years, I am getting closer to the perfect phazer. I trail ride 65% of the time and boon dock 35% of the time. I wrote a thread 3 years ago about needing a bilge pump in my boots to keep my feet dry after riding my phazer for the first time in 2007.
Thanks Totallyamaha for this forum and helping me keep my sanity!!!
Top 30 Must have mods for (phazer 07 gt)
1. 136" Track and rail extensions 1.5"
2. Tunnel Extension
3. Apex mtn snow shovel bag mounts perfect on tunnel extension.
4. Chrome Exhaust turn out from yamaha
5. Handle Bar Hooks
6. Mountain Grab Bar
7. Snow Shovel with hack saw fits in mtn apex bag
8. Bow/hack saw fits under windshield bag -made by irwin tools
9. Yamaha Windshield bag
10 Yamaha Handle bar bag
11 Spare belt bag in A frame( Jumper cables fit in their also)
12 Mid height windshield with "piss on ski doo sticker"
13 Cable come long (strapped in front grab bar)
14 Yamaha phazer front grab bar
15 Yamaha mtn skis with bottoms milled off to match std ski keel
16 Woodys 6" duallys
17 Accessory fan behind radiator
18 Updated rear suspension frame and link(08)
19 Yamaha skid plate
20 Tunnel protectors(made from turning hy fax upside down)
21 Close that dam hole in back with diamond plate
22 Side skirts up front
23 Ulmer clutch kit
24 Drop chain case upper sprocket to 18 from 20 tooth
25 Up bushman steering kit
26 Ulmer front end Bushing Kit
27 Piece of starter rope to start your sled when the starter dumps
28 Marginal snow wheel kit
29 Anti bottoming kit from schmidt bros
30 Fourth wheel kit
Still a work in progress but maybe now I can start to modify the sled. Here are a few picture sorry for the darkness, stilling trying to figure out all this computer stuff!! All are welcome to add your ideas or link some of these topics to prior discussions.
Thanks
Phazer Will
Thanks Totallyamaha for this forum and helping me keep my sanity!!!
Top 30 Must have mods for (phazer 07 gt)
1. 136" Track and rail extensions 1.5"
2. Tunnel Extension
3. Apex mtn snow shovel bag mounts perfect on tunnel extension.
4. Chrome Exhaust turn out from yamaha
5. Handle Bar Hooks
6. Mountain Grab Bar
7. Snow Shovel with hack saw fits in mtn apex bag
8. Bow/hack saw fits under windshield bag -made by irwin tools
9. Yamaha Windshield bag
10 Yamaha Handle bar bag
11 Spare belt bag in A frame( Jumper cables fit in their also)
12 Mid height windshield with "piss on ski doo sticker"
13 Cable come long (strapped in front grab bar)
14 Yamaha phazer front grab bar
15 Yamaha mtn skis with bottoms milled off to match std ski keel
16 Woodys 6" duallys
17 Accessory fan behind radiator
18 Updated rear suspension frame and link(08)
19 Yamaha skid plate
20 Tunnel protectors(made from turning hy fax upside down)
21 Close that dam hole in back with diamond plate
22 Side skirts up front
23 Ulmer clutch kit
24 Drop chain case upper sprocket to 18 from 20 tooth
25 Up bushman steering kit
26 Ulmer front end Bushing Kit
27 Piece of starter rope to start your sled when the starter dumps
28 Marginal snow wheel kit
29 Anti bottoming kit from schmidt bros
30 Fourth wheel kit
Still a work in progress but maybe now I can start to modify the sled. Here are a few picture sorry for the darkness, stilling trying to figure out all this computer stuff!! All are welcome to add your ideas or link some of these topics to prior discussions.
Thanks
Phazer Will
Attachments
phaze5
TY 4 Stroke Guru
when i bitched to the dealer about wet boots they said i was lieing, so i went outand spent 200 on newboots. didn'tevenslow it down, then i spent a 100 on theyre fix 20 bucks worth of aluminum with vents in it, slowed it down a little,
went and taped up the vents much better, i should of taped the whole thing up .
went and taped up the vents much better, i should of taped the whole thing up .
I wear a all lower rubber water proof boot and long bib pant legs problem solved along with closing rear tunnel side skirts for front with permatex clear glue.
