YaMon
Pro
05 Vector Mtn.
9000 rpm gets me a top speed of 95 mph, is this right? Everything is bone stock. My weight is about 200 lbs. and I am running 600 ft elevation. I was thinking about changing either the clutch or gearing to give me a little more low end if that is all the speed I am going to get anyway. Any ideas?
9000 rpm gets me a top speed of 95 mph, is this right? Everything is bone stock. My weight is about 200 lbs. and I am running 600 ft elevation. I was thinking about changing either the clutch or gearing to give me a little more low end if that is all the speed I am going to get anyway. Any ideas?
Southfork Sooner
Pro
The 05 RX1 Mountain clutching would keep you at about 10,300 RPM.
rideblue
Expert
Full shift rpm on the vector should be about 8500. Spinning faster than that does not gain any more power. Add some heavier rivets to your wieghts to get the rpms to 8400 - 8500.
Thrusted Vector
Expert
It will go into limp mode at 9200
The vector makews max hp@8600 rpm's.
www.ty4stroke.com/download.php?id=9435
www.ty4stroke.com/download.php?id=9435
YaMon
Pro
Thanks guys. Looks like I will add a little weight to bring her down.
Does the speed seem correct?
Does the speed seem correct?
