a arm movement

[bluegrass]

so I think I my need to replace my a arm bushing. I had play in the top a arm tighten the bolt up and a lot of the play went a way but I still have a small amount of play should you have a little or have no play at all also if I change the bushing out with iolite should I replace the bolt and the long collar to sled has 900 mile on it

 

[SteelerJim]

The stock bolts and collars will be fine. Just regrease them. If you have a welder weld the nuts to the subframe while you have it apart.

 

[basic700]

The stock bolts and collars will be fine. Just regrease them. If you have a welder weld the nuts to the subframe while you have it apart.

You talking about the nuts for the lower a arms?

 

[Kirkdking]

More than likely I welded my lower a arms nuts onto the sub frame makes it a lot easier for taking them off and putting back on..

 

[grizztracks]

Make sure you use loctite on the threads when reassembling the front (even if the bolt uses a lock nut)



http://s589.photobucket.com/user/grizzt ... t=6&page=1

 

[SteelerJim]

The stock bolts and collars will be fine. Just regrease them. If you have a welder weld the nuts to the subframe while you have it apart.

You talking about the nuts for the lower a arms?

Yes sir. I welded the nuts for the front of the lower A arms on the inside of the subframe so the bolt heads are now in the front below the bumper for easier access.