A few Pics of the new sled

[WINGNUTS]

Stripped down the FX tonight to get a better look at her. Quite the pile of parts and plastics I accumulated Have to take the gas tank off to get to the top of the motor. Made it close but dealer topped me off with fuel so couldn't get that close! Here they are! : I took these with my phone, sorry that they aren't crystal clear.

 

[Grimm]

So, where's the motor?

What are your plans for the sled now?

 

[WINGNUTS]

So, where's the motor?

What are your plans for the sled now?

Hell, it took alot for me to see it also. If the tank comes off it is sitting right under the handle bars.

No plans as of yet. Maybe some re-routing of a couple wires, add studs, and a few other extras. Other then that ride it

 

[ZAKSTANG]

that a cobra under the cover in that one pic???? nice sled too by the way maybe next yr ill get one...no funds this yr

 

[swamps]

that a cobra under the cover in that one pic???? nice sled too by the way maybe next yr ill get one...no funds this yr

I saw that cobra as well nice car

 

[SharkAttak]

So, where's the motor?

What are your plans for the sled now?

Hell, it took alot for me to see it also. If the tank comes off it is sitting right under the handle bars.

No plans as of yet. Maybe some re-routing of a couple wires, add studs, and a few other extras. Other then that ride it

what is the matter with the wires? why re-routing

 

[WINGNUTS]

Yup, that is a 65' shelby cobra 427 "the vette shredder". The rear tail light wire run on the outside of the frame. I think there is room to run it inside the frame of the rear seat. Can't wait to ride

 

[swamps]

Yup, that is a 65' shelby cobra 427 "the vette shredder". The rear tail light wire run on the outside of the frame. I think there is room to run it inside the frame of the rear seat. Can't wait to ride

A friend of mine also has a cobra blue with white pin stripes and it has a 427 as well, nice car indeed.

 

[RedRX1]

Nice pics. I wish they would copy doo and put a carrier area on the back of the tunnel. There is minimal storage on this thing.

 

[WINGNUTS]

Nice pics. I wish they would copy doo and put a carrier area on the back of the tunnel. There is minimal storage on this thing.

I am going to get the bag that goes in front for the spare belt

and also the windshield bag


I will most likely remove the cookie tin that is on the rear tunnel after I purchase those two products.

However, i am have a hell of a time trying to locate a place to put my registration. NY sucks because it has to be somewhere on the front of the sled and can't be on the tunnel. Don't know what to do as of yet.

 

[viper_chick]

However, i am have a hell of a time trying to locate a place to put my registration. NY sucks because it has to be somewhere on the front of the sled and can't be on the tunnel. Don't know what to do as of yet.

I bought the plates from a guy off hardcoresledder, I don't know if he is a supporter of this site or not, here are some pics.

 

[pat the rat]

when come time for an oil change,do you have to reach the motor for that plug on top.if so its going to be a pain

 

[WINGNUTS]

when come time for an oil change,do you have to reach the motor for that plug on top.if so its going to be a pain

Nope, under the belly of the sled there is a plate that is removed to reach the plug on the bottom of the engine.