roostinraptor
Pro
im planning on starting on my sled projects soon and i have an 08 rtx extended to 144 and i am putting air frame boards on it.
do these require drop brackets or is there enough room between rear suspension bolt and bottom?
directions say to not cut beyond rear support does that mean to just not cut support or to not cut rear of board also?
do these require drop brackets or is there enough room between rear suspension bolt and bottom?
directions say to not cut beyond rear support does that mean to just not cut support or to not cut rear of board also?
APEX 06
TY 4 Stroke God
- Joined
- Apr 30, 2009
- Messages
- 4,016
- Reaction score
- 36
- Points
- 1,253
- Location
- Sheboygan, WI
- Website
- www.sheboyganyamaha.com
- Country
- USA
- Snowmobile
- 09 Nytro XTX, 08 Apex Mtx
This post will help. Im doing kinda the same thing but I'm making my own.
http://ty4stroke.com/viewtopic.php?t=89741&postdays=0&postorder=asc&start=0
http://ty4stroke.com/viewtopic.php?t=89741&postdays=0&postorder=asc&start=0
roostinraptor
Pro
thanks but neither was an 08 with 08 boards going on. different project all together
Take a closer look at Ulmers post. It is a 08 he just really modifies the angle of the boards good thing to the 08's look like they have coffee tables attached to ether side of the tunnel
roostinraptor
Pro
yes ulmers is an 08 sled but he put 2010 boards on it, i have the 08 boards with the stock angle.
