Hi!
Went for a "last ride of the season" this Saturday together with a friend on a doo. Some places the snow was hard, in one occation I tried to boondock and the snow was too hard and I tipped the sled over on the side, it took a couple of seconds before I shut it off because I thought I was going to be able to just push the sled down but I couldnt so I then pulled the chord.
When the sled was down on both of the skis I started it, I noticed that the engine symbol flashed in the the display along with an error code (30). Then the engine shut down by itself. At the time I didnt have a slightest idea on what was happenening so I fired her up again and I noticed there was some extra noise coming from the engine. Then it shut down again.
I fired her up again and carefully blipped the throttle, the sound disappeared and the code disappeared.
So, my explenation on this incident is that air must have gotten trapped somewhere in the oil system ?
I`ve seen this happen on bikes after changing oil/oil filter. Sometimes you have to undo the filte whilst the engine is running just to get the air out of it.
I`m not worried, just curious. Anyone had this happen??
Also it has the MCX 180kit installed.
Joakim
Went for a "last ride of the season" this Saturday together with a friend on a doo. Some places the snow was hard, in one occation I tried to boondock and the snow was too hard and I tipped the sled over on the side, it took a couple of seconds before I shut it off because I thought I was going to be able to just push the sled down but I couldnt so I then pulled the chord.
When the sled was down on both of the skis I started it, I noticed that the engine symbol flashed in the the display along with an error code (30). Then the engine shut down by itself. At the time I didnt have a slightest idea on what was happenening so I fired her up again and I noticed there was some extra noise coming from the engine. Then it shut down again.
I fired her up again and carefully blipped the throttle, the sound disappeared and the code disappeared.
So, my explenation on this incident is that air must have gotten trapped somewhere in the oil system ?
I`ve seen this happen on bikes after changing oil/oil filter. Sometimes you have to undo the filte whilst the engine is running just to get the air out of it.
I`m not worried, just curious. Anyone had this happen??
Also it has the MCX 180kit installed.
Joakim