anti ratchet driver measurement

[Need for Speed 2]

Hey guys can someone save me a little time and give me the location measurement for 2 anti ratchet drivers on an apex axle it would save me a drive to the sled thanks for any help

 

[rxrider]

I have a RX-1, part#s for the drive axel are the same as the Apex.

From the left end of drive axel to center of left drive sprocket tooth: 11.2 centimeter = 4.409 inch

From the right end of the axel to center of right drive sprocket tooth: 16.5 centimeter = 6.496 inch

CTC between sprocket teeths: 22.5 centimeter = 8.858 inch
Also check CTC between track windows to verify. My measurements fits a 136" RipSaw 1.25" track.

 

[Need for Speed 2]

Thank you rx rider