sproket slip! what is the best sproket?

[alexyamrx1]

I guys! I run a apex mountain MPI stage 1,my drivers slip all the time??? i put NEW (WAHL) Anti Ratchet Drivers! and after some ride it slip again!any body have solution for my? my track is very tight and slip yet! my track is 159x15x2.25 / 2.52 pitch my suspention is a ZX2 AD BOIVIN! with (WAHL) Anti Ratchet Drivers 9 tooth 2.52 pitch thanks guys

 

[Modedmach1]

Avid drivers are by far the best. Not cheap but, they are worth it.

 

[Accentstripe1]

sprocket

X2 I smoked my Wahl drivers halfway through the season last year. Avids are expensive but imo the best

 

[givemeaboost]

If you need 8 tooth 2.52 pitch drivers you'll have to stay with the Wahls. Avid doesn't make them.


Ken.........

 

[nate007]

Please add your location to your site profile, thanks!

If you're only running a stage1 and slipping your drivers, I'm wondering if you have something else going on with your rear suspension that would cause that to happen so quickly? I don't know much of anything about the ZX2, but I wouldn't think that the power level of a stage1 would do that?
Maybe I'm wrong, but does that sound strange to anyone else?

 

[alexyamrx1]

Thx i got new Avid and they work magic!

By the way i added my location and a signature.

Thx for the reply

 

[ghost rider]

Please add your location to your site profile, thanks!

If you're only running a stage1 and slipping your drivers, I'm wondering if you have something else going on with your rear suspension that would cause that to happen so quickly? I don't know much of anything about the ZX2, but I wouldn't think that the power level of a stage1 would do that?
Maybe I'm wrong, but does that sound strange to anyone else?

I had this problem with my zx2...the fix was to tighten the track so there is a 1" sag.
At outside temp.
Or if you store in a heated garage at 72 degrees there would be zero sag.

I haven't had the problem since and I run stock drivers and 10 lbs boost.

 

[alexyamrx1]

I guys my AVID drivers are striped on the shaft ??? (tabarnak) any body have a other solution for me thanks.

 

[kinger]

Yikes I think you got the best! Something must be a miss. I have run Avids and 10-11psi stage 1 apex on a 151 and not a single issue.

Sorry I am not much help.