Back in the saddle

04nightfire

Extreme
Joined
Jan 30, 2014
Messages
64
Reaction score
34
Points
723
Location
Orillia, ontario
Country
Canada
Snowmobile
2020 Sidewinder L-TX LE
I picked this up on the weekend. Been a few years since I had my last Nytro. Bring on the snow.
 

Attachments

  • Nytro.jpg
    Nytro.jpg
    175.7 KB · Views: 135
Georgina? If so I was keeping an eye on that one….
 
That’s a good score, well done. I’m just down in Uxbridge, we should try and ride some time.
 
That’s a good score, well done. I’m just down in Uxbridge, we should try and ride some time.
Sounds good to me. The guy I bought it from has done just about every upgrade to it that you can do. Had all the service and maintenance records to go with it as well.
 
Awesome!!
What mods have been done?
What seat is that?
Airbox mod
WRP Seat
Star Suspension
Exit Shocks in the rear
Full Hindle
JRE Spindles
Curve Ski's
OFT Relocate
Trail Tank
Clutch Kit
Grizz Gusset
Mountain Cooler
 
Received a good amount of snow on the weekend and was able to get out on the sled. On a hard pack road, it would bounce rev limiter at 70 mph and doesn't pull nearly as hard as what my previous, stock Nytro would. Going to have to do some digging into it and see what's going on.
 
Received a good amount of snow on the weekend and was able to get out on the sled. On a hard pack road, it would bounce rev limiter at 70 mph and doesn't pull nearly as hard as what my previous, stock Nytro would. Going to have to do some digging into it and see what's going on.
I’d say not enough weight in the clutches.
 
I’d say not enough weight in the clutches.
That's what I'm thinking. Previous owner said it has a clutch kit but no idea who's or what it is. Gotta bring it back into the shop so I can dive into it.
 
I had great luck with Dalton Quick Adjust weights in my Hurricane/Hindle kitted Nytro. Combined with the right springs/helix if would walk my buddies modded Nytro with a Schmidt Bros. kit.
 
So, sled has dalton adjustable weights, stock primary and secondary springs as well as stock helix. There was only the 1" long set screw in each weight. Added more weight, will see what that did to sled on the weekend.
 


Back
Top