It’s that time of year again, the Manitoba Ball Licker or ballicker as some people spell it on the Pinawa Channel. Run what you brung at wot past the gun and put the biggest number you can on it. Lakercr figures speeds will have to be 140+ this year, guess it depends on conditions etc.
This past weekend rumor has it on HCS that Grant on his RX1 pulled a 134mph in the 660’ and I’m sure this guy won’t miss the ball licker. The question is does he have any left over to pull it off? Well we’ll see!!!! Should be a good show again this year, let’s hope for some good weather and good times and that nobody gets hurt.
Here to link to hcs for the detail of the BL,,,,,
http://www.hardcoresledder.com/forums/i ... pic=304368
This past weekend rumor has it on HCS that Grant on his RX1 pulled a 134mph in the 660’ and I’m sure this guy won’t miss the ball licker. The question is does he have any left over to pull it off? Well we’ll see!!!! Should be a good show again this year, let’s hope for some good weather and good times and that nobody gets hurt.
Here to link to hcs for the detail of the BL,,,,,
http://www.hardcoresledder.com/forums/i ... pic=304368
ptt
Guest
I think grants speed was approx. 2000 feet (snow). Wpg. beach.
Don't forget the 1000ft. on Sunday also on the lake.
Don't forget the 1000ft. on Sunday also on the lake.
Your right I found out that it was 2000 feet. 1000 foot at Lac du Bonnet this Sunday?
ptt
Guest
That's what Gussy originally said, Same as last year.
Sunday starts out at 1000'. After everyone has run, they move it up to 1500' for the big iron.
rlemotorsports
Newbie
I saw Jeff Trask do 140in 660 at oxfoed last year spinning entire length
Similar threads
