Just got a new Yuasa 20 series battery and noticed the terminals are backwards compared to previous batteries. The + terminal is on the right when looking at the battery. Can i install it backwards, or do they make cable extensions? Thanks.
Battery Question
- Thread starter slimjim2525
- Start date
thor452
Because I can
- Joined
- Jan 5, 2010
- Messages
- 3,029
- Reaction score
- 621
- Points
- 1,603
- Location
- Shawano,WI 54166
- Country
- USA
- Snowmobile
- 2012 Apex XTX 2017 Sidewinder LTX-LE
you got the wrong one, one letter is wrong take it back and get the right one.
Yes I know, but i can't return it. I bought it online, and already put the acid in it before i noticed the terminals were switched. My question is can i use the one i have by either turning 180 degrees, or do they make cable extensions?
thor452
Because I can
- Joined
- Jan 5, 2010
- Messages
- 3,029
- Reaction score
- 621
- Points
- 1,603
- Location
- Shawano,WI 54166
- Country
- USA
- Snowmobile
- 2012 Apex XTX 2017 Sidewinder LTX-LE
I had this problem with the battery that came with my supercharger when I went back to stock as it was backwards I was able to get the negative wire to reach and I had some heave gauge wire from an old stereo amp from my teenage years I used solder and heat shrink tube to connect the two and crimped a new end on it to connect the battery
Riceburner
Lifetime Member
- Joined
- Apr 14, 2003
- Messages
- 1,760
- Reaction score
- 123
- Points
- 1,158
- Location
- N.B. Canada eh
- Country
- Canada
- Snowmobile
- SideWinder LTX 50th
Turn it 180 degrees.
This is not going to work either. I can get the terminals on, but the cover will not go back over it. I took out the same exact model number battery, a Yuasa YTX20HL-BS, and now the terminals are opposite. I have looked for a modifier on the model number to signify the terminals are switched, like an R, or 1 or something, and i'm stumped. Any help would be appreciated. At this point I'm willing to buy another battery, and just throw this one in my Grizzly.
Figured it out. Need a YTX20H-BS, not a YTX20HL-BS. I think maybe my old one was mislabeled.
