sheetwright
Northwoods Snowmobiling Facebook
Anybody ever have a Boss seat show up to short? I ordered a midrise seat from a Boss dealer on the web, and had it shipped directly to the dealer that had my Apex apart. They went to put it on, and it ended up being 1-1/2" to short. They measured another Boss on one of their Apex's, and it was different. See these pics. Any ideas? Anything that could be wrong? The sled was extended to 136" by the previous owner, but that shouldn't of changed anything. I shot an email over to the supplier, and have not heard anything yet.
Attachments
maxdlx
Lifetime Member
Send it back
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
maxdlx said:Send it back
My sentiments exactly. If it was special ordered then it was a hand built one. There are always small variances in the seats. But I'd send that one back, it does not fit right.
sheetwright
Northwoods Snowmobiling Facebook
Matt got a hold of me, and is dealing with the dealer direct now. He said he will make it good. Just wanted to make sure it wasn't a simple thing missed on our part. Thanks for the help guys
87gtNOS
VIP Member
- Joined
- Nov 30, 2005
- Messages
- 1,892
- Age
- 50
- Location
- Toronto
- Country
- Canada
- Snowmobile
- 12 Apex XTX MCX powered
They make a Boss seat for the short track Apex's that use the stock taillight/exhaust setup????
sheetwright
Northwoods Snowmobiling Facebook
Ding ding ding! We have a winner Even the darn dealer that sold it to me out of Utah didn't realize there was a difference in the seat length. The mountain is about 1-1/2" shorter. Who would of thunk All I asked him was; does Boss sell a seat that fits the stock exhaust system, and he said he had one left. So I took it. I wil make it work instead since I have a fabrication shop at my disposal. Matt offered to take it back for nothing, and pay for the shipping. Which was a nice gesture, but I want to keep it. You guys will see it when it is done Boys and there toys
niko
TY 4 Stroke Junkie
That shouldn't be hard to mod it to fit better just takes time and a little head scratching.
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
sheetwright said:Ding ding ding! We have a winner Even the darn dealer that sold it to me out of Utah didn't realize there was a difference in the seat length. The mountain is about 1-1/2" shorter. Who would of thunk All I asked him was; does Boss sell a seat that fits the stock exhaust system, and he said he had one left. So I took it. I wil make it work instead since I have a fabrication shop at my disposal. Matt offered to take it back for nothing, and pay for the shipping. Which was a nice gesture, but I want to keep it. You guys will see it when it is done Boys and there toys
How did you fab it up to make it work? I just ordered a hold over stock exhaust seat for my Attak. but I'm sure it'll be a tad short. Anyone have a good solution for filling in the void area where the seat come up a tad short?
niko
TY 4 Stroke Junkie
we talking about the rear tunnel area?
sheetwright
Northwoods Snowmobiling Facebook
The only place that had a gap was the top over the back. The gaps were where the little two voids are between the light and the two exausts. One piece of black gasket from the hardware store to cover up that gap worked perfect. The gap was maybe 1" in those two areas and about 1/2-3/4 in others. So a little strip of gasket and it worked great. The seat is very comfortable and solid.
Can you do a picture of the inside of the trunk?
Do Boss seats mount with the same bolts as the stock one?
Do Boss seats mount with the same bolts as the stock one?
Direct Attack
Veteran
Is this a taller seat ? ( meaning you sit up higher and have a little more leg room )sheetwright said:Anybody ever have a Boss seat show up to short? I ordered a midrise seat from a Boss dealer on the web, and had it shipped directly to the dealer that had my Apex apart. They went to put it on, and it ended up being 1-1/2" to short. They measured another Boss on one of their Apex's, and it was different. See these pics. Any ideas? Anything that could be wrong? The sled was extended to 136" by the previous owner, but that shouldn't of changed anything. I shot an email over to the supplier, and have not heard anything yet.
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
sheetwright said:The only place that had a gap was the top over the back. The gaps were where the little two voids are between the light and the two exausts. One piece of black gasket from the hardware store to cover up that gap worked perfect. The gap was maybe 1" in those two areas and about 1/2-3/4 in others. So a little strip of gasket and it worked great. The seat is very comfortable and solid.
Thx Sheetwright. This post was great. Much appreciated. When the seat arrives and i get it installed I'll take pics. If mine also comes up short, I'll try your idea of black gasket to fill in the void areas, if need be. Incidentally, I know a place where they have 1 more of the seats left. They are just the mid rise version, not the high rise, all black. But it should be way better than stock.
Super Sled
Lifetime Member
- Joined
- Feb 25, 2009
- Messages
- 3,631
- Location
- Riding on the North Shore, MN
- Country
- USA
- Snowmobile
- Summit X
sheetwright said:The only place that had a gap was the top over the back. The gaps were where the little two voids are between the light and the two exausts. One piece of black gasket from the hardware store to cover up that gap worked perfect. The gap was maybe 1" in those two areas and about 1/2-3/4 in others. So a little strip of gasket and it worked great. The seat is very comfortable and solid.
Sheetright: Waht do you mean by black gasket? Like a rubber of some sort? Something that can be custom fit to size?
Thx!
sheetwright
Northwoods Snowmobiling Facebook
They put black foam gasket with adhesive on one end on th elight assembley. Since the seat is black and the void between the exhaust and seat are also black it doesn't look bad at all IMO. Here are some pics
Attachments
Similar threads
- Replies
- 0
- Views
- 3K
- Replies
- 6
- Views
- 3K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.