Can someone explain control rod?

[granto211]

I cant find anything on what adjusments do. What is affected when screwd shorter vs longer?

I have bad ski lift out of corners.

 

[actionjack]

Loosen the lock nut (closer to the rear), adjust threads by turning nut closer to the front. More threads showing = more ski lift. Fewer threads = more ski pressure. Set to middle, try and adjust.

You can DL your manual from the FAQ thread and read "Adjusting the control rod".

Be careful not to adjust to far out and make sure the lock nut is tight enough. Once you have ice build up trail side adjustment is impossible. I can never loosen the thing with the tool. I use channel locks.

 

[granto211]

Thank u very much

 

[snoprof6]

a screw driver and hammer also works well to loosen/tighten the jam nut

 

[TOMBOB]

if you are on the trail stop at local bar order large

glass hot hot water. pour it on your control rod.

get your work done in a flash.

TOMBOB

 

[gun nut]

transfer rod

There must be many of you that threw your manual away, before reading.

 

[thor452]

Re: transfer rod

There must be many of you that threw your manual away, before reading.

what manual?