sxrviper
Extreme
Hey guys my 08 nytro is wearings my carbides off the front of the wear bar and not the back.My skis on a cement floor are leaning forward.Kinda weird whi its only wore front half of carbide to nothin...any ideas on what might be causing this...thxs
Also i put a cherry bomb pipe on sled and now it seems to hit rev limiter alot...didnt think a pipe would do this...
Also i put a cherry bomb pipe on sled and now it seems to hit rev limiter alot...didnt think a pipe would do this...
SnoNinja
aka "Plan B"
- Joined
- Feb 18, 2015
- Messages
- 605
- Reaction score
- 749
- Points
- 958
- Location
- Gaylord, Michigan
- Country
- USA
- Snowmobile
- 2015 Viper LTX-LE
2016 Vector LE For my Bride
2007 Phazer GT, 136" Stretch.
2002 SXR600 (still own)
1997 SX600 (sold)
1997 XT500 (sold)
2013 Can-Am Maverick 1000XRS
2006 Dodge Charger RT - Top Banana Daytona
what kinda condition are your ski rubbers in? Might need to be replaced, or might need to add shims under the back half of the ski rubbers to shift the pressure more to the back of the carbide.
More free flowing exhaust will definately raise RPM. Often, additional weight in the primary is required to keep off rev limiter.
More free flowing exhaust will definately raise RPM. Often, additional weight in the primary is required to keep off rev limiter.
