darv
Lifetime Member
- Joined
- Aug 9, 2005
- Messages
- 1,457
- Age
- 63
- Location
- International Falls,minnesota
- Country
- USA
- Snowmobile
- 08 Apex 40th LTX
Here is some food for thought if can have all those unit he has a very high rate of money with credit company I would not be surprised that is rate would below prime I took care of the larges mercury dealer in North America his line of credit was 18 million an his rate when I handled his Account was 1-5 below prime and he had special rates with mercurySo your saying it only cost $40.00 per month to carry a sidewinder under a floor plan so thats $480.00 per year … So lets just use $14,000 as a cost of sled to dealer thats about 2.86% which seems a little low but if that is their cost then no big deal to carry over a couple of sleds.. In the case of dealer near me , they had approx. 150 new sleds, 75 rental sleds, and a few used sleds that did not sell… $1,600 I quoted was loss in resale value because the sled is a year older and I estimated the floor plan cost to be about the same … lets just say the floor plan cost is $500.00 and depreciation is $1,500.00 its still a $2,000.00 loss of revenue for that dealer… Prices are falling and older models can be bought cheaper now and next fall they will still be bought at a good price Iam sure…
Simplespeed
Expert
- Joined
- Jan 8, 2022
- Messages
- 460
- Age
- 65
- Location
- 1191 Sauk Lane , Saginaw, Mi. 48638
- Country
- USA
- Snowmobile
- 2006 Apex , 2017 Sidewinder LTX -LE
Yes when prime rate was at its lowest but rates have went up since that point and what is the typical floor plan rate at this time? Even if he has no interest on those units, he still has inventory that is a year old and has decreased in value… sleds still depreciate fast in a buyers market as is now the case….Here is some food for thought if can have all those unit he has a very high rate of money with credit company I would not be surprised that is rate would below prime I took care of the larges mercury dealer in North America his line of credit was 18 million an his rate when I handled his Account was 1-5 below prime and he had special rates with mercury
- Joined
- Apr 17, 2003
- Messages
- 5,349
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
I don't have a dealership, but I've been told current interest rates are 12-13% on floor plans. Just picked up a brand new left over 2024 Polaris from a dealer in Pine Island, MN. They had the option of paying interest on units or paying them off, they chose to pay them off and try to sell 200+ units at their cost! If interest was only $40 per month they would have paid the interest I'm sure!
journeyman
Lifetime Member
- Joined
- Nov 27, 2005
- Messages
- 2,021
- Age
- 61
- Location
- Prior Lake, Mn.
- Country
- USA
- Snowmobile
- 2007 Attak GT
- LOCATION
- Prior Lake,MN
I work with a former Polaris engineer. He did say they had one for testing. They also had one with a RZR based turbo engine and he said the 998T literally destroyed the Polaris engine version.A 998 in a Matryx chassis may work well? I'm told it's out there and Yamaha is willing to deal.
journeyman
Lifetime Member
- Joined
- Nov 27, 2005
- Messages
- 2,021
- Age
- 61
- Location
- Prior Lake, Mn.
- Country
- USA
- Snowmobile
- 2007 Attak GT
- LOCATION
- Prior Lake,MN
....and not having to design a widebody chassis to fit the engine, why we are hearing rumors of a 2-cylinder, 4 stroke turbo version.I'm thinking it may come with a price tag that is more than Cat wants to pay, but I'm not sure.
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,072
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
....and not having to design a widebody chassis to fit the engine, why we are hearing rumors of a 2-cylinder, 4 stroke turbo version.
So your saying the yamaha 998 fits in their current catalyst?
Hope they turn the hp up to at least 280hp level and see how the chassis holds up for trail riding.
journeyman
Lifetime Member
- Joined
- Nov 27, 2005
- Messages
- 2,021
- Age
- 61
- Location
- Prior Lake, Mn.
- Country
- USA
- Snowmobile
- 2007 Attak GT
- LOCATION
- Prior Lake,MN
No, saying it doesn't fit and Cat/Textron would have to build a wide body Catalyst but probably don't want to spend the extra $$ to do so.So your saying the yamaha 998 fits in their current catalyst?
Hope they turn the hp up to at least 280hp level and see how the chassis holds up for trail riding.
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,072
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
Sorry I read that wrong.No, saying it doesn't fit and Cat/Textron would have to build a wide body Catalyst but probably don't want to spend the extra $$ to do so.
You were talking about Polaris.
Simplespeed
Expert
- Joined
- Jan 8, 2022
- Messages
- 460
- Age
- 65
- Location
- 1191 Sauk Lane , Saginaw, Mi. 48638
- Country
- USA
- Snowmobile
- 2006 Apex , 2017 Sidewinder LTX -LE
I agree at todays rates even auto dealerships like Car Fax is quoting 12 to 13% on used car loans with good credit… Bad credit it goes much higher like 18% How many units will they sell at those rates, same with sleds… Dealers have no choice but to sell at a loss if they have alot of units…I don't have a dealership, but I've been told current interest rates are 12-13% on floor plans. Just picked up a brand new left over 2024 Polaris from a dealer in Pine Island, MN. They had the option of paying interest on units or paying them off, they chose to pay them off and try to sell 200+ units at their cost! If interest was only $40 per month they would have paid the interest I'm sure!
journeyman
Lifetime Member
- Joined
- Nov 27, 2005
- Messages
- 2,021
- Age
- 61
- Location
- Prior Lake, Mn.
- Country
- USA
- Snowmobile
- 2007 Attak GT
- LOCATION
- Prior Lake,MN
Two different posts.Sorry I read that wrong.
You were talking about Polaris.
Separate post to SrxSpec.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 661
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
So I keep seeing width but is the 1100 about the same width as the 998?
KnappAttack
24X ISR World Drag Racing Champion
- Joined
- Feb 19, 2004
- Messages
- 4,695
- Location
- Welch MN
- Country
- USA
- Snowmobile
- 2023 Sidewinder LTX-LE
2017 Sidewinder LTX-LE
So I keep seeing width but is the 1100 about the same width as the 998?
No, its narrower by quite a bit. Wouldn't be so bad, but the twin cylinder four-strokes sound sooooo bad. My old 1100 turbo was fast once tuned, but sounded horrible and was not much fun to ride, but that could be the fact the other problems they had in the chassis department with handling, ride and reliability problems driveline. I absolutely hated the Z1 and the 2012 I had with the 1100 in them.
The more cylinders the better they are, width be damed. I'll take a boosted four-cylinder Apex engine with the sweet under driven and cushioned output shaft please! This is the answer for all clutch and belt issues and so much easier on the driveline. Easily worth the added cost and little bit of weight going to the Apex engine by the time you put what's needed into the 998 to make it reliable in the clutching and driveline components.
acpantera
Pro
Turbo Wankel!!
Norse
Pro
- Joined
- Jan 1, 2019
- Messages
- 181
- Location
- Sápmi
- Country
- Norway
- Snowmobile
- 2013 Arctic Cat M1100 HCR 162"
Boondocker turbo 250HP(sold)
2016 Yamaha SR Viper MTX LE 162"
MCXpress 270HP, lots of mods (sold)
2021 Arctic Cat M8000 Hardcore Alpha 155"
N/A (sold)
2023 Yamaha SW MTX LE 153"
M&M Racing 270HP, Elevate, lots of mods
Would love to see something like the Koenigsegg Freevalve engine put in a sled, brilliant concept.
Simplespeed
Expert
- Joined
- Jan 8, 2022
- Messages
- 460
- Age
- 65
- Location
- 1191 Sauk Lane , Saginaw, Mi. 48638
- Country
- USA
- Snowmobile
- 2006 Apex , 2017 Sidewinder LTX -LE
Now your talking about some power but few could afford the price of that power ….Would love to see something like the Koenigsegg Freevalve engine put in a sled, brilliant concept.
Similar threads
- Replies
- 386
- Views
- 51K
- Replies
- 34
- Views
- 6K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.