JERSEYJOE
Expert
Apparently Micro Belmont is no longer in business so where can I send my APEX clutch to get rebuilt / rebalanced?
Yamajon1
VIP Member
- Joined
- Nov 6, 2016
- Messages
- 543
- Reaction score
- 513
- Points
- 1,128
- Location
- Oshkosh Wisconsin
- Country
- USA
- Snowmobile
- 2016 SR Viper RTX DX
Former Yamaha sleds:
2004 Venture 600 2002 SX Viper 700
1997 Vmax 600 SX 1994 Vmax 600 1989 Exciter
1986 Vmax 540 1986 Phaser 1981 SRX 440
Check with the guys at Thunder Products.
- Joined
- Nov 11, 2016
- Messages
- 548
- Reaction score
- 961
- Points
- 1,018
- Location
- Cedarville, MI
- Country
- USA
- Snowmobile
- Yamaha, Polaris, AC and Ski-Doo
- LOCATION
- Cedarville, MI
- WEBSITE
- www.thunderproductsclutching.com
Thank you Yamajon1
We rebuild and balance clutches.
Here is our SNOW*TECH article coming out this month
We rebuild and balance clutches.
Here is our SNOW*TECH article coming out this month
Yamajon1
VIP Member
- Joined
- Nov 6, 2016
- Messages
- 543
- Reaction score
- 513
- Points
- 1,128
- Location
- Oshkosh Wisconsin
- Country
- USA
- Snowmobile
- 2016 SR Viper RTX DX
Former Yamaha sleds:
2004 Venture 600 2002 SX Viper 700
1997 Vmax 600 SX 1994 Vmax 600 1989 Exciter
1986 Vmax 540 1986 Phaser 1981 SRX 440
Yes I read that already that’s how I knew you provided those services
Macheater
VIP Member
- Joined
- Feb 7, 2006
- Messages
- 770
- Reaction score
- 298
- Points
- 1,228
- Location
- Niles, Ohio
- Country
- USA
- Snowmobile
- 2006 Apex GT, 2002 SRX700, 2023 Polaris Boost VR-129
- LOCATION
- Niles, Oh
Hey guys, just wondering what the price is to balance a primary? I guessing that's done with no weights or springs installed?Thank you Yamajon1
We rebuild and balance clutches.
Here is our SNOW*TECH article coming out this month
View attachment 149824
- Joined
- Nov 11, 2016
- Messages
- 548
- Reaction score
- 961
- Points
- 1,018
- Location
- Cedarville, MI
- Country
- USA
- Snowmobile
- Yamaha, Polaris, AC and Ski-Doo
- LOCATION
- Cedarville, MI
- WEBSITE
- www.thunderproductsclutching.com
Hey guys, just wondering what the price is to balance a primary? I guessing that's done with no weights or springs installed?
Hi Macheater, sorry for the delay as Thunder Products Clutching was at the Milwaukee Snow Show from Thursday till Sunday.
As far as balancing clutches....if the clutches are new or clean prior to balancing, the price will be far cheaper than if we have to clean belt and dirt debris out of the clutch. Dirt and belt debris will have an effect on balancing. We will usually balance the clutch without weights as some competitors weights are a full gram off from each other.
Price to balance on a brand new or clean clutch is $50.00
If work is needed, our shop rate is $70 per hour and if the clutch needs repair,parts or needs to be disassembled...the price will be more.
Thank you