justin1635
Extreme
- Joined
- Mar 10, 2005
- Messages
- 56
it seems that on some 05 models,the plastic sliding buttons on the spider in the front clutch need to be re shimmed. You do need special tool,but the dealer can do it quickly.
LazyBastard
TY 4 Stroke God
It sounds like your idle is set too low.
justin1635
Extreme
- Joined
- Mar 10, 2005
- Messages
- 56
thats with the choke on idling @ around 1700 rpm, when its done its pre ride check and the light stops blinking, it idles at 13-1500 and its still noticable :|
Musky Hunter
Pro
I just read the latest issue of SnowGoer magazine. They have a write up on the 06 Yammies. In the article they state that the 2006 sleds "have O ring dampers on the sliders in the primary to quiet clutch rattle, noticed primarily at idle".I'd be looking into these to see if they'll fix your deal.
Blue shadow
TY 4 Stroke Guru
Did my 2003 rx1 er and 70 percent noise gone.
![](/styles/vip.gif)
Yama-Crazy
VIP Member
I had mine shimmed by the dealer with 06 clutch parts and still hear some rattle...but considering how quiet rs engine is its no big deal to me...I'm extremely happy with the sled and how dependable, FAST,torquey, good handling and economical it is...and thats most important. We will always find something to complain about I'm sure if we dig hard enough. ![Yrules :yam: :yam:](/styles/default/xenforo/smilies/yrules.gif)
![Yrules :yam: :yam:](/styles/default/xenforo/smilies/yrules.gif)