YamerHammer
Expert
I can't see all of them but if the rest look just like the one I see they are fine. Just so you know there is 3 in total.
Yes all 3 are the same, weights are free. rollers are free, spyder is free.
YamerHammer
Expert
Here.....check it out.
http://www.ty4stroke.com/viewtopic.php?t=83580
http://www.ty4stroke.com/viewtopic.php?t=83580
nice, thanks.
RJH
TY 4 Stroke Junkie
This is almost impossible online to think out but...
You changed the balance with the kit..it may be the secondary is too light..so it opens before its time..making a popping sound.
Or - it can happen if the belt is too narrow...big spring will hold the primary out...then it will snap in at low rpm
You changed the balance with the kit..it may be the secondary is too light..so it opens before its time..making a popping sound.
Or - it can happen if the belt is too narrow...big spring will hold the primary out...then it will snap in at low rpm
I dont think its the belt, I was going to put all stock parts back in the primary today but I had no time.
Went out today and put everything back to stock, there is no more sputter at start to wot, the primary still makes a little pop but not so bad. I was woundering if someone can post some picks of a primary took apart, there seams to be some wear on the shaft behind the spyder and would like to know if its normal. Thank.
