RX1Jim
TY 4 Stroke Junkie
I was just going through the entire exhaust system on my 03 RX-1. I was checking the condition of the 4 exhaust donut seals between the 4 exhaust flange pipes and the 2 "Y" pipes and the 2 exhaust donuts between the 2 "Y" pipes and the main exhaust system. The sled has 4000 miles on it and all of the donuts look like new, no wear when comparing them to new donuts. I se on the Apex/Attack forum that there is a problem with the "Y" pipes cracking. Have there been any problems with either the "Y" pipes o fteh flage pipes cracking on the RX-1's? If so, where do they crack? I'm getting ready to abrasive blast and ceramic coat all of the exhaust parts. Thanks!!!
Len Todd
TY 4 Stroke God
Mine looked good at 8K miles. 
RX1Jim said:
No there is no problem with the RX's. They lightened everything on the Apex and the broblem is only with them. I have an 03 with over 13K on it and donuts are like new. 05 has 6k on it same deal. I ride with more than 15 different guys with RX's and not a single problem and don't recall ever seeing a post on any issues.
Picksoo
Veteran
On my 2004 RX Warrior with over 24,k ,I had the weld let go where the two pipes join to one. I had it welded. Ok now
RX1Jim
TY 4 Stroke Junkie
Thanks guys. I just grit blasted all the exhaust parts prior to getting them ceramic coated. I looked all the components over and there is no signs of carcks or problems. The exhaust donut seals also look fine. Off to the ceramic coater we go!!
