Dalton QAY-70 wts on a stock Winder

[yamadooman]

this has probably been asked a hundred times, but is anybody running the Dalton QAY-70 wts on their stock Sidewinder? If so, are you running them empty, or do you have to load them with a little weight? Thanks in advance

 

[Soupy]

I was testing this yesterday. My setup is stock with a muffler only. Dalton black and green primary w glide washers, Dalton orange secondary wrapped to 70, 33/35 helix. I definitely needed to add some weight, have the 1" in there now, worked my way up from empty.

Sent from my SM-G955U using Tapatalk

 

[yamadooman]

Thanks for the response, I will be running all stock, so might be slightly different. Just an FYI. The directions say not to run a 1" in there alone

 

[Soupy]

I don't have it bottomed out

Sent from my SM-G955U using Tapatalk

 

[ROCKERDAN]

That is with bl/green.....

But with all stock, I would go with the dalton 66g.

 

[**sj**]

That is with bl/green.....

But with all stock, I would go with the dalton 66g.

I have a set if needed

 

[ROCKERDAN]

I have a set if needed

You got 66g?

Anyone running a stocker, I would grab these from SJ.

 

[Bigblue1]

going with 74grams on

I was testing this yesterday. My setup is stock with a muffler only. Dalton black and green primary w glide washers, Dalton orange secondary wrapped to 70, 33/35 helix. I definitely needed to add some weight, have the 1" in there now, worked my way up from empty.

Sent from my SM-G955U using Tapatalk

I have similar set up with TPI springs instead. I will be running 74 grams on Dalton QAY-70 per Ben's suggestion on PT, but given my weight ride style I am sure to be adjusting