yamyfreak
Pro
Just received my clutch allignment tool. The blue Yamaha tool. Check my sled and is out by at least 1/4 inch center to center. That is on the short. Also looks out on the straight. Does any one know how and where i start to allign this sled. And is the Blue Yamaha tool the right one. I was always lacking on top end. I now see why. 



SnoWarrior
Lifetime Member
- Joined
- Jan 13, 2005
- Messages
- 439
- Reaction score
- 95
- Points
- 1,008
- Location
- Long Island, NY
- Country
- USA
- Snowmobile
- 2024 Sidewinder L-TX LE
yamyfreak
Pro
Thanks for the thread. Makes sense now. Is this something I need to do on a yearly basis or was it not set properly from factory?


SnoWarrior
Lifetime Member
- Joined
- Jan 13, 2005
- Messages
- 439
- Reaction score
- 95
- Points
- 1,008
- Location
- Long Island, NY
- Country
- USA
- Snowmobile
- 2024 Sidewinder L-TX LE
It could have been like that from the factory. Mine was off a little also.
Once I set it, never had to touch it again.

Once I set it, never had to touch it again.



Similar threads
- Replies
- 6
- Views
- 1K