bigcountry
Pro
startin to put the excell exhaust on the rx-warrior i was just wondering if you have to pull the gas tank to put the exhaust on i can't see any other way to get to the clamps?? if so how much of a pain is butt is it??
- Joined
- Apr 13, 2003
- Messages
- 21,816
- Reaction score
- 9,392
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
yes, have to pull the tank. http://www.totallyamaha.com/snowmobiles ... nstall.htm
bigcountry
Pro
thanks for the link mr.sled.... u don't happen to know any tricks to get the suspension back into place to bolt it back up?? if your working from the back of the sled up i'm talkin bout the second set of bolts that hold the skid in place, its a pain in the a$$ to try and get them into place. any tips would be greatly appreciated!! thanks
what year rx1? If it's a 03 or 04 loosen the btoom boldts of the transfer rods.
bigcountry
Pro
its an 04 warrior
check out the tech page it gives you pics and tips on how to remove and install.
bigcountry
Pro
if i don't have the plasctics that go around the excell exhaust is it allright to leave it open?? is their a seat bran i can buy to put on the back so the seat bolts down?? do i have to buy some sort of a heat sheild to put onthe back on the seat?? just wondering what my options are
bigcountry
Pro
yea i looked at the website before and i saw a couple of brace in the pictures but noting in the product section??
