firts time out on the trails and she stops running right

matj1990

Newbie
Joined
Feb 7, 2013
Messages
20
Reaction score
0
Points
11
Location
Norfolk NY
Website
www.facebook.com
Well we got some snow finally so I took the new to me phazer out for a ride 30 miles went great halfway home got in a field went to juice it from a stop she backfired through the airbox now its throwing a code 13 intake air pressure sensor . I opened the air box to take a look andthe ccylinder closest to the PTO rubber voot was just sitting their so I limped it home as it will not idle at all just dies. But seemed to run ok .

Soon what am I looking at now what do I need to do? I have no clue where the sensor is or anything

Not to happy she only has 1500 miles on it
 
This was the issue guys ... and note that the wire next to it had a cut as well not sure how this happened but i stripped the black one and put her back in the hole as far as it would go filled it with silicone and she runs fine now. Just got to let the silicone setup and should be good. I know this is not the proper fix but i couldnt get that pin out for the life of me to solder the wire onto it.
13981_4699928659463_754280536_n.jpg
 
Yea, that will give you the code.

Can you tell me more about the rubber boot though?
 
Yes I know, but they were just sitting there?
 
Velocity stacks.

Maybe at some time someone didnt realize those plugs need to be removed before taking airbox off?You are going to need to fix that broke wire properly eventually.Rockmiester I believe has those plugs and can help you get it fixed right.
 
oh yea its just a temp fix for now. at least is was nothing Major tell ya it made me upset with my 3000 dollar purchase real quick lol. All in all I love the sled so far its a blast to ride just hope to many things like this dont happen
 


Back
Top