FIXPOWERSPORTS
Extreme
we have in stock and ready to ship 660 grizzly clutch kits for 02-07 models. These kits include clutch kit and carb kit. Our clutch kits are currently being used on stock, griz with big wheel kits, and full blown mods bored, exhaust, big wheels grizzly's. These kits will take away the bog that you are currently experiencing when you hit the gas giving you immediate pull when hitting the gas, better back shift, better acceleration and pull thoruogh out the middle. This kit will not hurt your top end or performance. This is the best bang for your buck you can get in a Grizzly clutch kit and install the kit yourself. Kit includes weights and rollers made specifically for our kit, pilot jet and shim as well as carb settings to allow the clutching to work hand in hand with the carb kit.
cost $99.95 plus shipping of $9.95 anywhere in lower 48 states, Canada and Alaska residents get in touch with us for shipping cost.
Let us know if you have any questions
Thanks,
Fix Power Sports
cost $99.95 plus shipping of $9.95 anywhere in lower 48 states, Canada and Alaska residents get in touch with us for shipping cost.
Let us know if you have any questions
Thanks,
Fix Power Sports
- Joined
- Apr 13, 2003
- Messages
- 21,648
- Reaction score
- 9,270
- Points
- 2,103
- Location
- Schofield, WI
- Website
- www.totallyamaha.com
- Country
- USA
- Snowmobile
- 2020 Sidewinder SRX
Tim,
I have a big bore in my grizz 686, it would be nice to get her to rev and pull harder on the bottom and mid with the 26 mudelites.... I may have to try one of these. I have the clutches turned for more over drive and have a spacer in the secondary, what other changes is in your kit.
I have a big bore in my grizz 686, it would be nice to get her to rev and pull harder on the bottom and mid with the 26 mudelites.... I may have to try one of these. I have the clutches turned for more over drive and have a spacer in the secondary, what other changes is in your kit.
FIXPOWERSPORTS
Extreme
PRETTY SIMPLE, WE TRIED ABOUCH OF DIFFERENT SET UPS AND THIS WORKED THE BEST.
WE HAD DIFFERENT ROLLERS AND WEIGHTS MADE AND COMBINED THAT WITH CHANGES TO THE CARB (JETTING/NEEDLE SETTING/FLOAT) TO GIVE YOU IMMEDIATE RESPONSE ON THE LOW END AND PULL THROUGH THE MID (THE RPMS DEFFINTIELY RAMP UP )WITH NO PERFORMANCE LOSS ON TOP. IT WILL ALSO GIVE YOU BETTER ACCELERATION AND IMPROVED BACK SHIFT.
WE HAVE INSTALLED THESE ON FULL BLOWN MODS LIKE YOURS, STOCK GRIZ AND BIG WHEEL GRIZ AND HAVE NOT HAD ANYONE COME BACK AND SAY IT DID NOT IMPORVE THE LOW END.
DID'NT MEAN TO CAPATILIZE EVERYTHING, BAD HABBIT AND I NEED TO STOP IT.
THANKS AGAIN,
TIM
WE HAD DIFFERENT ROLLERS AND WEIGHTS MADE AND COMBINED THAT WITH CHANGES TO THE CARB (JETTING/NEEDLE SETTING/FLOAT) TO GIVE YOU IMMEDIATE RESPONSE ON THE LOW END AND PULL THROUGH THE MID (THE RPMS DEFFINTIELY RAMP UP )WITH NO PERFORMANCE LOSS ON TOP. IT WILL ALSO GIVE YOU BETTER ACCELERATION AND IMPROVED BACK SHIFT.
WE HAVE INSTALLED THESE ON FULL BLOWN MODS LIKE YOURS, STOCK GRIZ AND BIG WHEEL GRIZ AND HAVE NOT HAD ANYONE COME BACK AND SAY IT DID NOT IMPORVE THE LOW END.
DID'NT MEAN TO CAPATILIZE EVERYTHING, BAD HABBIT AND I NEED TO STOP IT.
THANKS AGAIN,
TIM
Similar threads
