YukonMP
TY 4 Stroke Guru
- Joined
- Dec 25, 2014
- Messages
- 847
- Location
- Yukon Territory
- Country
- Canada
- Snowmobile
- 2014 Venture MultiPurpose 2020 VK Professional ll
Hey Mooseman. You got a like on a four year old post because it worked ... I needed this yesterday. Thanks.
Mooseman
I'm not all knowing. Post your question in forum.
- Joined
- Nov 3, 2009
- Messages
- 3,989
- Location
- Greely, Ontario
- Country
- Canada
- Snowmobile
- '07 Venture MP (gone)
'07 Phazer FX (gone)
'09 Phazer GT (gone)
'10 RS Venture GT (My current ride)
'10 Nytro FX (son's)
- LOCATION
- Greely, ON Canada
Which one worked? And were you able to permanently fix it? I don't think that a solution has ever been found for the flashing D light or the "push the button and nothing happens" problems.
YukonMP
TY 4 Stroke Guru
- Joined
- Dec 25, 2014
- Messages
- 847
- Location
- Yukon Territory
- Country
- Canada
- Snowmobile
- 2014 Venture MultiPurpose 2020 VK Professional ll
A little background. I had pulled the sled too deep into the parking spot and backed it up. In this instance I shut it off in reverse which I have done in the past without issue.
So after reading your post I lifted up the track and spun the secondary by hand and established it was in forward gear. Then I jut blipped the throttle several times till it hit the TORS/limiter and that got the track spinning free and the light stopped flashing. Not exactly as per your post but you were the inspiration.
So after reading your post I lifted up the track and spun the secondary by hand and established it was in forward gear. Then I jut blipped the throttle several times till it hit the TORS/limiter and that got the track spinning free and the light stopped flashing. Not exactly as per your post but you were the inspiration.
