anyone have any seat time on their new Megafloat installed on older (<2011) Apex?
jneilsonjr
Veteran
yes I did this past weekend, Works amazing. Real smooth with no botteming yet. I also installed the Float 2 on the front and am real happy with them also. If you are a bigger guy and cant get the ohlins dialed in then i would highly recommend it. Just my opinion
jat59
Lifetime Member
I have also installed the Floats all the way around. I have no seat time as of yet, hopefully, in the next couple days I can get out. I was wondering, for those of you that have seat time, did the recommended pressure for the MEGA work the best for you? Also, I hear about 45-55 for the front? By the way, I am about 200-210 suited up.
(I also ride a Vector LTX, but am guessing the dial in can't be that far off)
(I also ride a Vector LTX, but am guessing the dial in can't be that far off)
jneilsonjr
Veteran
I feel that in the float 2's you don't want to run anything less then 65lbs, I ran 60 and way too soft. I think I am going to run 75.
RollRite
Lifetime Member
- Joined
- Dec 16, 2004
- Messages
- 113
- Age
- 60
- Location
- Pickerel , Wisconsin
- Country
- USA
- Snowmobile
- 2011 Apex
I have 65# in my se and its perfect for me.
homeplaya
Extreme
RollRite said:I have 65# in my se and its perfect for me.
What r u running in mega float?
I found mine at 185 to hard, rebound at the halfway point to hard also!
RollRite
Lifetime Member
- Joined
- Dec 16, 2004
- Messages
- 113
- Age
- 60
- Location
- Pickerel , Wisconsin
- Country
- USA
- Snowmobile
- 2011 Apex
Mega float I run 155 lbs my wait is 200
Similar threads
- Replies
- 1
- Views
- 2K