Fox shocks 2010 nytro

[mikel]

I can't find the correct top mount bushing the one from Yamaha has the correct OD to big ID any idea where to get the right one

Mike L

 

[stubb111]

mike....I think the bushings from rear fox shocks from 2010 and up nytro mtx has the right ID and have a wide bushing and a narrower one for different widths. let me know the ID and width you require and I will check my shop to see I can find some to measure and locate part numbers. I ordered some when I installed a fox float shock into my nytro xtx skid a couple years ago, I used the stock rear shock bushing and the fit was perfect.....

you could also just get a bigger bushing made up for your install.

 

[mikel]

mike....I think the bushings from rear fox shocks from 2010 and up nytro mtx has the right ID and have a wide bushing and a narrower one for different widths. let me know the ID and width you require and I will check my shop to see I can find some to measure and locate part numbers. I ordered some when I installed a fox float shock into my nytro xtx skid a couple years ago, I used the stock rear shock bushing and the fit was perfect.....

you could also just get a bigger bushing made up for your install.

 

[mikel]

This is front suspension shocks
The bolt is 10mm it had a sleeve that is
14mm
The rubber bushings from Yamaha are
25mm OD that fit the top of the Fox Float 2
The ID on the rubber bushing is 20mm
So I am needing 14mm to 2mm
It would be nice if there would be 1 bushing not 3
The bushing on the bottom of the shock is 25OD the ID is 14 but the width is wider
The width is 30mm
Yamaha only shows the bolt & rubber bushing no sleeves
Thanks Mike

 

[mikel]

The width is 30mm

 

[stubb111]

sorry buddy... shop is a f*****g mess right now and I can't find bushings. I will try and get in there this weekend and search around to find them.

cheers