sledfvr
Pro
I'm wondering about putting my ported/built head from my 06 apex on a 2011 or newer eps sled and bottom end, with an alpine front mount turbo with a 2871 garrett. I have Boost it standalone box with auxiliary injectors so the sled runs on its stock computer and has 4 injectors in the innercooler.
How would this work with the exup? Also wondering how much room there is under the power steering motor/steering post for the header?
I know people have swapped older engines into newer eps models, but didn't see anything quite like this.
A 174" mountain apex with power steering would be nice.
Thanks guys.
How would this work with the exup? Also wondering how much room there is under the power steering motor/steering post for the header?
I know people have swapped older engines into newer eps models, but didn't see anything quite like this.
A 174" mountain apex with power steering would be nice.
Thanks guys.
Stubbs
TY 4 Stroke Master
- Joined
- Nov 7, 2006
- Messages
- 1,120
- Age
- 44
- Location
- Uxbridge, On, Can.
- Country
- Canada
- Snowmobile
- ‘16 Apex XTX with 137” Mono II
+ other gooodies
- LOCATION
- Uxbridge ON
- Joined
- Apr 17, 2003
- Messages
- 5,348
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
I don't think there's enough room to run the front mount with the EPS motor there. I think oiling holes are different and you can put a 2006-2010 head on a 2011+ block either.
kinger
VIP Member
@Srxspec can or cannot? I think the engine will NOT a allow a older style head on it IIRC.I think oiling holes are different and you can put a 2006-2010 head on a 2011+ block either.
- Joined
- Apr 17, 2003
- Messages
- 5,348
- Location
- Menno, SD
- Website
- www.ulmerracing.com
- Country
- USA
- Snowmobile
- 2014 Yamaha SR Viper LTX, 2014 Yamaha SR Viper RTX SE, 2015 Yamaha SR Viper MTX SE 162 (turbo), 2015 Yamaha SR Viper MTX SE 153
- LOCATION
- Menno, SD
- WEBSITE
- www.ulmerracing.com
Can't
kinger
VIP Member
Won't work sorry, I looked into it a few years back. Your only option is the MCX rear mount kit which keeps the Exup in place and is a fricken ripper on the 2011+. Just be careful boosting 11+ motors the pistons are different and not as robust. If you do a 11+ I would have the engine built first.How would this work with the exup? Also wondering how much room there is under the power steering motor/steering post for the header?
I know people have swapped older engines into newer eps models, but didn't see anything quite like this.
A 174" mountain apex with power steering would be nice.
Thanks guys.
sledfvr
Pro
Thanks guys! Sounds like we're limited with the eps sleds.
Similar threads
- Replies
- 3
- Views
- 1K
- Replies
- 46
- Views
- 148K