Fuel Programmer

[scottyfum]

Hi, I just had a question for the guys that have the Fuel programmer. I currantly ride an 09 XTX and I put the ulmer stage 3 kit with the k&N's,Excell header,plugs and clutch kit. I just order the fuel programmer and was curious on what type of gains i will see and how it effects fuel miliage etc. Any information what be appreciated. I also have an Ultra Q muffler which Allen from Ulmer told me that was the closest HP ratings to the full Excell. Thanks, Scott

 

[BADSLED]

I ran the exact same setup with the Ultra Q muffler and was very happy. Can't quantify the gains with PC3 as I installed them all together.

 

[basic700]

Does it stall or backfire w/o the PC3?

 

[shadow44]

Does it stall or backfire w/o the PC3?

Not sure about stalling but you may get popping of hesitations. When I added an exhaust to my 08 RTX I had all kinds of popping and hesitations, I added a fuel controller ( RB3 ) with an okj map in it and some of it went away. Put it on the dyno and did a proper map for all the mods and no more popping, hesitation, farts or anything...sled is much happier now...it also freed up 2 hp as a bonus.

Proper mapping for your mods may not yield a " seat of the pants " gain, but your engine will run smoother and better.

 

[basic700]

Sorry. You meant what i knew

 

[nate007]

The Nytro motor does have the popping noise stock, it's just the nature of the beast with its firing order and how it's set up. There have been a few that have noticed it with the stock exhaust, but since it's so quiet, it hides most of it.