LeSerpent
Newbie
Hi,
This is my setup for my Garmin Montana 700i mount.
Very simple and low cost.
Ram mount # RAM-B-247U-15.
If it can help anyone.
This is my setup for my Garmin Montana 700i mount.
Very simple and low cost.
Ram mount # RAM-B-247U-15.
If it can help anyone.
race24x
TY 4 Stroke Master
Is that the only part that you bought? Any closer ups of the way you mounted on handlebars
LeSerpent
Newbie
Yes, 2 parts only.Is that the only part that you bought? Any closer ups of the way you mounted on handlebars
Let me know if you need more info.
Attachments
Clintww
VIP Member
- Joined
- Mar 6, 2022
- Messages
- 113
- Age
- 54
- Location
- Central MN
- Country
- USA
- Snowmobile
- 2001 SXR. 2005 RX1. 2017 Sidewinder
- LOCATION
- MN
I did the same thing. I think i'm using a 4 inch arm, and I cut a half circle out of the handle bar pad to help keep it centered. It stays in place well if it is tight enough. I like the setup as it is easy to glance at while moving and I can take it in with me easily if I need to. I also added another power port to plug in it with
Clintww
VIP Member
- Joined
- Mar 6, 2022
- Messages
- 113
- Age
- 54
- Location
- Central MN
- Country
- USA
- Snowmobile
- 2001 SXR. 2005 RX1. 2017 Sidewinder
- LOCATION
- MN
mrtwostroke
Expert
- Joined
- Apr 24, 2003
- Messages
- 226
- Age
- 57
- Location
- Sweden,Lulea
- Country
- Sweden
- Snowmobile
- Sidewinder MTX 240 Tune Sidewinder XTX 240 Tune MountainMax SL 153.
Yamajon1
VIP Member
- Joined
- Nov 6, 2016
- Messages
- 954
- Location
- Oshkosh Wisconsin
- Country
- USA
- Snowmobile
- 2016 SR Viper RTX DX
Former Yamaha sleds:
2004 Venture 600 2002 SX Viper 700
1997 Vmax 600 SX 1994 Vmax 600 1989 Exciter
1986 Vmax 540 1986 Phaser 1981 SRX 440
I had mine mounted to the riser like that but found it hard to look at except when stopped. I moved it to above the factory gauges and now I can glance at it when coming to intersections with out taking my eyes off the trail. I used a 1” Ram ball mount on a adhesive base and stuck it right behind the factory gauge.
GR8BBQ
VIP Member
- Joined
- Mar 23, 2018
- Messages
- 1,361
- Location
- Hamlin, NY
- Country
- USA
- Snowmobile
- 2017 Yamaha SRViper X-TX SE
2017 Ski-Doo Blizzard 900 ACE
2001 Yamaha SXR 700 Triple
1995 Polaris Indy Lite
I have the BOP GPS mount, ant it works great. Right above the gauges. Details here: https://ty4stroke.com/threads/custom-gps-mounting.164038/#post-1577996
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,074
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
This!
Arctic cat dash caddy
That would be mine with the Cat Mid-LXR windshield. Which model gps is that ? It seems to fit perfectly on the dash caddy.
ty4stroke.com
super1c
Moderator
- Joined
- Apr 10, 2010
- Messages
- 946
- Age
- 53
- Location
- Freeland - Otsego lake, MI
- Country
- USA
- Snowmobile
- 22 sidewinder LTX-LE
This is what I’m thinking but with the XT2 if the new guage doesn’t pan out with a retrofit to our sidewinders.This!
Arctic cat dash caddy
That would be mine with the Cat Mid-LXR windshield. Which model gps is that ? It seems to fit perfectly on the dash caddy.ty4stroke.com
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,074
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
I installed the dash caddy last year and mounted my 8" tablet on it.This is what I’m thinking but with the XT2 if the new guage doesn’t pan out with a retrofit to our sidewinders.
Works great and a great place to carry my hat for when going inside the warming areas.
stgdz
TY 4 Stroke Junkie
- Joined
- Mar 27, 2021
- Messages
- 661
- Age
- 46
- Location
- Buffalo MN
- Country
- USA
- Snowmobile
- 19 tcat, 15 4000 RR, 13 800 RR
Anyone have any advice on how to mount the Garmin car gps units? The mount is a circular mount and it should have a simple mount but I'm stumped on this one on how to keep it secure and from flying off.This!
Arctic cat dash caddy
That would be mine with the Cat Mid-LXR windshield. Which model gps is that ? It seems to fit perfectly on the dash caddy.ty4stroke.com
1nc 2000
Lifetime Member Tim
- Joined
- Feb 26, 2010
- Messages
- 3,074
- Location
- Marquette, MI
- Country
- USA
- Snowmobile
- Yamaha FX Nytro RTX SE
I drilled 4 holes in the door of the dash caddy.
The holes are the bolt pattern of the ram mount on the back of my tablet holder.
Just bolted my tablet holder to door.
The holes are the bolt pattern of the ram mount on the back of my tablet holder.
Just bolted my tablet holder to door.
super1c
Moderator
- Joined
- Apr 10, 2010
- Messages
- 946
- Age
- 53
- Location
- Freeland - Otsego lake, MI
- Country
- USA
- Snowmobile
- 22 sidewinder LTX-LE
It won’t come off. Ran all this season with that mount. It’s surprising how solid and secure it is.Anyone have any advice on how to mount the Garmin car gps units? The mount is a circular mount and it should have a simple mount but I'm stumped on this one on how to keep it secure and from flying off.
super1c
Moderator
- Joined
- Apr 10, 2010
- Messages
- 946
- Age
- 53
- Location
- Freeland - Otsego lake, MI
- Country
- USA
- Snowmobile
- 22 sidewinder LTX-LE
Similar threads
- Replies
- 28
- Views
- 7K
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.