Heat Vents = Soaked Feet??

[mytro]

I have about a 100 miles on my Nytro so I'm still adjusting, I was wondering who has the fix for moving the heat off your left boot and pant leg saving you from soaked and frozen feet. Do I need to go back to the 12 rubber boot? I was in powder for 10 mins today and my foot was soaked, Baffin boots soaked right through..

GRRR....

 

[snownutz]

What year sled?

 

[Stoli]

a cheap route.... just take some duct tape and tape the inside of the bottom vent at your foot. Just make sure you are not closing up all the vents here - it will need to breath. Also standard Pet Screen from Home Depot and put it under the hood vents as a pre-filter to keep the snow out.

I also added the IP vent from OFT to release all the heat upwards - worked great.

www.oftracing.com

 

[mytro]

What year sled?

2009

 

[billymx815]

Yeah...what year. the 2009 has a shield in place to help with that I believe...Other than that duct tape is always your friend.

 

[YamaMTX]

mine is a 2009 and mine gets wet also

 

[billymx815]

mine is a 2009 and mine gets wet also[/quote

Really? do you ride in a lot of powder? I only get the wet foot when riding off trail in powder.

 

[YamaMTX]

Yes I do look for powder!!!

 

[**sj**]

hers what I did,,,I took some two sided tape and slipped it in between the lowest body panel and the bulkhead areas...anywhere I saw light witha bright light under the sled while using a screwdriver to pry apart...then used duct tape to seal the footwell..on the backside..