heated visor wiring

[Gottago06]

Where is everyone wiring in the heated visor cord if not using the 12v socket?

 

[Carla 123]

To the battery or there is a plug down by the chaincase

 

[Wannaviper]

If you want your shield to turn off when the ignition turns off, as Upton said, there is a plug down by the chain case on the right hand side, and you can buy the heated shield plug that plugs into it at an Arctic Cat dealer, and presumably at a Yamaha dealer as well. When conditions are bad, I use my heated shield, even when I am stopped with the engine off, so I wired direct to the battery. Just be sure to use a fuse on the positive wire if you hitch direct to the battery.

 

[Peter A]

Might want to consider this...

SMART SUPPLY Plug&Play Power Port

The RoczToyz.com SMART SUPPLY is a super quick, easy, Plug & Play multiple power outlet for your ride!
SMART SUPPLY has TWO 1 Amp USB outlets to charge/run anything with a USB cord.
You can easily charge/run your Phone, I-Pod, GPS, MP3 player, ANYTHING USB powered, as you ride!

 

[Gottago06]

Thanks guys I went to my dealer and got the harness.

 

[Gottago06]

So funny story, I finally got around to installing the harness and pulled the speedo sensor off the chain case. That makes a guys smile!!! Guess brake clean and rtv are in my future..