dexter
TY 4 Stroke Master
so I am cleanin my warriors carbs for the first time.. so far so good, but have some questions:
1) on the pilot screw on the outside of the bowl that has a spring. does the rubber washer go first into hole or the brass washer? 3 of them came out rubber first and 1 brass. which goes into hole first?
2) Under the main jet holder there is a white straw type thing...do I take this out and clean as well?
3) lastly, is cleaning under the float crucial? I am a bit scared to take it off with those thin holders.
thanks!!!!!
1) on the pilot screw on the outside of the bowl that has a spring. does the rubber washer go first into hole or the brass washer? 3 of them came out rubber first and 1 brass. which goes into hole first?
2) Under the main jet holder there is a white straw type thing...do I take this out and clean as well?
3) lastly, is cleaning under the float crucial? I am a bit scared to take it off with those thin holders.
thanks!!!!!
Take a look at this thread it will answer some of your questions. http://www.ty4stroke.com/viewtopic.php?t=97997
